Toolpack:Selecting Timeslots for TDM Interfaces C
From TBwiki
(Difference between revisions)
(→Applies to version(s): v2.9, v2.10) |
m |
||
| Line 1: | Line 1: | ||
| − | === '''''Applies to version(s): | + | === '''''Applies to version(s): 2.9, 2.10, 3.0, 3.2''''' === |
{{DISPLAYTITLE:Selecting Timeslots for TDM Interfaces}} | {{DISPLAYTITLE:Selecting Timeslots for TDM Interfaces}} | ||
The last step to the H.248 configuration is to assign timeslots to the TDM interfaces that are associated with the H.248 configuration. | The last step to the H.248 configuration is to assign timeslots to the TDM interfaces that are associated with the H.248 configuration. | ||
Revision as of 08:34, 26 August 2020
Applies to version(s): 2.9, 2.10, 3.0, 3.2
The last step to the H.248 configuration is to assign timeslots to the TDM interfaces that are associated with the H.248 configuration.
1- Click H.248 in the naviagtion panel.
2- Select the line service you wish to configure, in the H.248 configuration window
(NOTE: A timeslot mask can be applied to all line services at once by selecting Timeslot mask for all line services instead)
3- Select timeslots:
- Add the desired timeslots by checking individual boxes, or simply select all timeslots by clicking Select all
- Click Save
4- Verify that the "h248_fix_term_cfg was successfully updated" message appears
Path
h248_statcks->gateway_h248->h248_tdm_terminations->YourTrunk->TimeslotMask
