Toolpack v2.3:Create an SCCP Route

Allyntree (Talk | contribs)
(Created page with '===To Create an SCCP Route=== '''1. Click 'Create new Sccp Route' from the SCCP LSAP configuration window''' 700px '''2. Config…')
Newer edit →

---

Revision as of 10:06, 8 November 2009

To Create an SCCP Route

1. Click 'Create new Sccp Route' from the SCCP LSAP configuration window

2. Configure the new SCCP Route

• Choose a name for the new route
• Select a protocol variant
• Select a replicant mode
• Select an SLS mask
• Select a destination point code
• Click 'Create'

3. Verify that the 'SccpRoute was successfully created' message appears