Configuring Toolpack:SIP to ISDN Gateway

From TBwiki

(Difference between revisions)

Revision as of 10:38, 22 January 2010

This guide is intended to help Toolpack user to configure a SIP to ISDN Gateway.

This guide assumes the following:

Toolpack version is v2.4.
Toolpack is already installed and running on the host.
Routing: All incoming SIP calls are bridged to ISDN and all incoming ISDN calls are bridged to SIP.

Here is a list of mandatory information that the user must know before configuring Toolpack:

SIP IP address(es) (IP address of your system where the SIP signaling will be incoming)
SIP provider(s)/consumers IP address(es) (remote IP address)
SIP port (default:5060)
SIP port type: UDP or TCP (default: UDP)

@@ Line 1: / Line 1: @@
-== Introduction ==
+== Introduction  ==
+This guide is intended to help Toolpack user to configure a [[SIP|SIP]] to [[ISDN|ISDN]] Gateway.<br>
+<br>
-== Before starting ==
+This guide assumes the following:<br>
+*Toolpack version is v2.4.<br>
+*Toolpack is already installed and running on the host.<br>
+*Routing: All incoming [[SIP|SIP]]&nbsp;calls are bridged to [[ISDN|ISDN]] and all incoming [[ISDN|ISDN]] calls are bridged to [[SIP|SIP]].
+<br>
-== Configuration ==
+== Before starting  ==
+Here is a list of ''mandatory'' information that the user must know ''before'' configuring Toolpack:<br>
+=== [[sip|SIP]]<br> ===
+*SIP IP address(es) (IP address of your system where the SIP signaling will be incoming)<br>
+*SIP provider(s)/consumers IP address(es) (remote IP address)<br>
+*SIP&nbsp;port (default:5060)<br>
+*SIP port type: UDP or TCP (default: UDP)
+=== [[Line_Interface|Line Interface]] ===
+*
+=== [[ISDN|ISDN]] ===
+*ISDN&nbsp;stack variant(s)<br>
+*Network side: User or network
+<br>
+== Configuration  ==
+<br>
+<br>
+<br>