Toolpack v2.4:Create an MTP3 Route

From TBwiki
(Difference between revisions)
Jump to: navigation, search
(To create an MTP3 route:)
m (STP definition)
 
Line 1: Line 1:
 
[[MTP3]] routes are built to route traffic from previously created point codes using linksets. One route is created per prevously defined point codes.
 
[[MTP3]] routes are built to route traffic from previously created point codes using linksets. One route is created per prevously defined point codes.
  
==To create an MTP3 route:==
+
== To create an MTP3 route: ==
  
'''1. Click "Create New Mtp3 Route" in the MTP3 network configuration window:'''
+
'''1. Click "Create New Mtp3 Route" in the MTP3 network configuration window:'''  
  
[[Image:Web_Portal_v2.4_Create_MTP3_Route.png|700px]]
+
[[Image:Web Portal v2.4 Create MTP3 Route.png|700px]]  
  
'''2. Configure the new MTP3 route:'''
+
'''2. Configure the new MTP3 route:'''  
*Enter a name for the route
+
 
*Select a point code for the route
+
*Enter a name for the route  
*Select a restart procedure:
+
*Select a point code for the route  
**None
+
*Select a restart procedure:  
**ITU88
+
**None  
**ITU92
+
**ITU88  
**[[ANSI]]
+
**ITU92  
*Select a point type:
+
**[[ANSI]]  
**SP (Signalling Point)
+
*Select a point type:  
**STP ( )
+
**SP (Signalling Point)  
*Check Route to Adjacent, if this route is to the adjacent network
+
**STP (Signal Transfer Point)  
 +
*Check Route to Adjacent, if this route is to the adjacent network  
 
*Click "Create" to finalize the configuration
 
*Click "Create" to finalize the configuration
  
[[Image:Web_Portal_v2.4_Creating_MTP3_Route.png|700px]]
+
[[Image:Web Portal v2.4 Creating MTP3 Route.png|700px]]  
 +
 
 +
'''3. Verify that the "Mtp3Route was successfully created" message appears:'''
  
'''3. Verify that the "Mtp3Route was successfully created" message appears:'''
+
[[Image:Web Portal v2.4 MTP3 Route Created.png|700px]]
  
[[Image:Web_Portal_v2.4_MTP3_Route_Created.png|700px]]
+
'''4. Associate the newly created route with a linkset:'''
  
'''4. Associate the newly created route with a linkset:'''
+
*Select a linkset from the list provided at the bottom of the route configuration window  
*Select a linkset from the list provided at the bottom of the route configuration window
+
*Click the "<<" button to associate the linkset with the newly created route
*Click the "<<" button to associate the linkset with the newly created route
+
  
[[Image:Web_Portal_v2.4_MTP3_Route_Linkset.png|700px]]
+
[[Image:Web Portal v2.4 MTP3 Route Linkset.png|700px]]

Latest revision as of 15:09, 8 February 2010

MTP3 routes are built to route traffic from previously created point codes using linksets. One route is created per prevously defined point codes.

To create an MTP3 route:

1. Click "Create New Mtp3 Route" in the MTP3 network configuration window:

Web Portal v2.4 Create MTP3 Route.png

2. Configure the new MTP3 route:

  • Enter a name for the route
  • Select a point code for the route
  • Select a restart procedure:
    • None
    • ITU88
    • ITU92
    • ANSI
  • Select a point type:
    • SP (Signalling Point)
    • STP (Signal Transfer Point)
  • Check Route to Adjacent, if this route is to the adjacent network
  • Click "Create" to finalize the configuration

Web Portal v2.4 Creating MTP3 Route.png

3. Verify that the "Mtp3Route was successfully created" message appears:

Web Portal v2.4 MTP3 Route Created.png

4. Associate the newly created route with a linkset:

  • Select a linkset from the list provided at the bottom of the route configuration window
  • Click the "<<" button to associate the linkset with the newly created route

Web Portal v2.4 MTP3 Route Linkset.png

Personal tools