Toolpack:Create an SCCP LSAP

From TBwiki
(Difference between revisions)
Jump to: navigation, search
Line 1: Line 1:
Creating a [[LSAP|Lower Service Access Point]] (LSAP) tells the [[SCCP]] protocol layer about a collection of [[SS7]] nodes that are accessible through [[MTP3 Layer|MTP3]].
+
Creating a Lower Service Access Point (LSAP) tells the [[SCCP]] protocol layer about a collection of [[SS7]] nodes that are accessible through [[MTP3 Layer|MTP3]].
 
+
 
+
WALKTHROUGH AND SCREENSHOT CONTENT ARE OUTSTANDING
+
  
  
 
== Description of parameters ==
 
== Description of parameters ==
 +
 
General explanation of the configuration parameters:
 
General explanation of the configuration parameters:
 +
 
*The '''Handle SCCP network''' parameter specifies the handle of the SCCP network
 
*The '''Handle SCCP network''' parameter specifies the handle of the SCCP network
 
*The '''Unique identifier SCCP LSAP''' parameter specifies the unique ID of the SCCP LSAP for a SS7 system
 
*The '''Unique identifier SCCP LSAP''' parameter specifies the unique ID of the SCCP LSAP for a SS7 system
Line 12: Line 11:
 
*The '''Maximum message length''' parameter specifies the maximum length of the message delivered to SCCP from this LSAP
 
*The '''Maximum message length''' parameter specifies the maximum length of the message delivered to SCCP from this LSAP
  
 +
== Further reading ==
 +
 +
[[Toolpack v2.5:Creating an SCCP LSAP|Configuring an SCCP LSAP (Toolpack v2.5)]]
  
 
[[category:Needs revising]]
 
[[category:Needs revising]]

Revision as of 10:53, 15 July 2010

Creating a Lower Service Access Point (LSAP) tells the SCCP protocol layer about a collection of SS7 nodes that are accessible through MTP3.


Description of parameters

General explanation of the configuration parameters:

  • The Handle SCCP network parameter specifies the handle of the SCCP network
  • The Unique identifier SCCP LSAP parameter specifies the unique ID of the SCCP LSAP for a SS7 system
  • The Unique identifier MTP3 userpart parameter specifies the unique ID of the MTP3 userpart to which this LSAP is connected
  • The Maximum message length parameter specifies the maximum length of the message delivered to SCCP from this LSAP

Further reading

Configuring an SCCP LSAP (Toolpack v2.5)

Personal tools