Configure Fax Passthrough

From TBwiki
Revision as of 15:49, 26 February 2013 by Cbilodeau (Talk | contribs)
Jump to: navigation, search

Applies to version(s): v2.6.

To enable passthrough, follow these steps: 

1. Make sure "Enable Fax/Modem Relay" is enabled.
2. Make sure "Detection Mode" is Standard.
3. Make sure "Relay Mode" is Passthrough.
4. Make sure "Enable switching to FAX relay upon CNG tone" is checked.
5. Make sure "Detection type" is "Silence Suppression off"
6. Make sure the Codec is the same as the remote end.


Profile passthru silence v26.png

Retrieved from "https://docs.telcobridges.com/mediawiki/index.php?title=Configure_Fax_Passthrough_A&oldid=13122"
Personal tools