Creating an M3UA Peer Server

Applies to version(s): v2.5, v2.6., v2.7

Now that you have create an M3UA peer signaling process (PSP), you must create a new Peer server. A peer server is a logical entity on the IP network that is served by one or more PSPs.

To create an M3UA peer server:

1- Click Create New M3ua Peer Server in the M3UA network configuration window

2- Configure the new M3UA peer server:

• Enter a name for the peer server
• Create a remote PSRV with a RC value representing the remote side； Take the RC value from ASP configuration.

 Note: For SG/ASP this value is mandatory to  be the same as the ASP local PSRV RC value

• Select the Traffic Mode Type. For remote peer server, this field is used in ASPAC.
• Click Create

3- Verify that the "M3ua Peer server was successfully created" message appears

4- Associate the newly created peer server with a peer signaling process (PSP):

• Select a PSP from the list of available PSPs
• Click the "<<" button to associate the PSP with the peer server

List of Parameters

• Name
• Local
• Routing Context
• Traffic Mode Type