Use Cases:Network Configuration

This article will list the steps required to complete the most common network configurations. It will explains how to configure the IP network and how to pass those configuration to the other menus.

Two subnets, One IP per subnet, untagged

[image of network configuration 1]

Configure IP Network A Configure IP Network B Subnet A uses the MGMT0 and because it is untagged, can only change with tbchangeip tbchangeip Subnet B uses untag bonded over VOIP0 and VOIP1 ports Create Virtual Port Create IP Address Configure SIGTRAN Configure SIP Configure H.248 Configure RADIUS Configure SIGTRAN Configure SIP Configure H.248 Configure RADIUS

Configure IP Network A

Subnet A uses the MGMT0 and because it is untagged, can only change with tbchangeip

• tbchangeip

Configure IP Network Subnet B

Subnet B uses untag bonded over VOIP0 and VOIP1 ports

• Create Virtual Port
• Create IP Address

Configure SIGTRAN

• Configure SIGTRAN

Configure SIP

• Configure SIP

Configure H.248

• Configure H.248

Configure RADIUS

• Configure RADIUS