Creating an N+1 Patch Panel
From TBwiki
Applies to version v2.9
One or two N+1 patch panels can be used to provide backup protection for the system.
To create an N+1 Patch Panel:
1- Click Hardware Units in the navigation panel
2- Click Create New Unit
3- Enter the name of the patch panel.
- Enter the serial number of the patch panel.
- Select N+1 Patch Panel as the type.
- Enter the location of the device.
- Enter a meaningful description for the device.
- Click Create
NOTE: If your system is configured with a main and a backup patch panel, repeat steps 2 and 3 to add another N+1 patch panel. The following image shows a backup N+1 panel being added.
4- Verify that the newly added N+1 patch panel(s) appear in the N+1 Patch Panels list.
Path
/configurations/@[configuration_name]/hardware_units/@[hardware_name]
Parameters (text)
/configurations/@[configuration_name]/hardware_units/@[hardware_name] description = "" graceful_upgrade_timeout = 0 is_np1_backup = false location = "" name = "@[hardware_name]" serial_number = "@[serial_number]" target_state = "Enabled" tdm_line_type = "E1_T1_J1" type = "N+1 Patch Panel" /configurations/@[configuration_name]/hardware_units/@[hardware_name]/advanced_parameters casr2_cpu0_load = 50 dsp_reserved_for_play_record = 1 enable_http = true enable_mgmt_port_redundancy = true enable_telnet = true enable_v34 = false enable_vbd_autoswitch = false isdn_primary_cpu_load_percent = 50 load_cas_on_secondary_cpu = false load_isdn_on_secondary_cpu = false load_iua_on_secondary_cpu = true load_lapd_on_secondary_cpu = true load_m2pa_on_secondary_cpu = true load_m2ua_on_secondary_cpu = true load_m3ua_on_secondary_cpu = true load_sip_on_secondary_cpu = true sip_cong_start_thresh = 2 sip_cong_stop_thresh = 4 sip_critical_cong_start_thresh = 1 sip_critical_cong_stop_thresh = 3 sip_dynamic_mem_size = "0 KB" sip_event_mem_size = "0 KB" sip_extra_mem = true sip_reduced_timer_start_thresh = 4 sip_reduced_timer_stop_thresh = 5 sip_signal_mem_size = "0 KB" sip_signal_sizes = "" tdm_companding = "aLaw" voip_codec_AMR = 0 voip_codec_ECHO_H = 0 voip_codec_ECHO_L = 0 voip_codec_ECHO_M = 0 voip_codec_EFR = 0 voip_codec_EVRC = 0 voip_codec_FR = 0 voip_codec_G711_5 = 0 voip_codec_G711_10 = 0 voip_codec_G711_20 = 0 voip_codec_G722_2 = 0 voip_codec_G723 = 0 voip_codec_G726_10 = 0 voip_codec_G726_20 = 0 voip_codec_G728 = 0 voip_codec_G729A = 0 voip_codec_G729EG_8 = 0 voip_codec_G729EG_11_8 = 0 voip_codec_ILBC13 = 0 voip_codec_ILBC15 = 0 voip_codec_mode = "Mixed Mode" voip_codec_QCELP8 = 0 voip_codec_QCELP13 = 0 voip_codec_SMV = 0 voip_codec_T38 = 0 /configurations/@[configuration_name]/hardware_units/@[hardware_name]/call_rate_limiting maximum_cas_call_burst = 0 maximum_cas_calls_per_second = 0 maximum_isdn_call_burst = 0 maximum_isdn_calls_per_second = 0 maximum_sip_call_burst = 0 maximum_sip_calls_per_second = 0
Parameters (json)
{
"advanced_parameters" : {
"casr2_cpu0_load" : 50,
"dsp_reserved_for_play_record" : 1,
"enable_http" : true,
"enable_mgmt_port_redundancy" : true,
"enable_telnet" : true,
"enable_v34" : false,
"enable_vbd_autoswitch" : false,
"isdn_primary_cpu_load_percent" : 50,
"load_cas_on_secondary_cpu" : false,
"load_isdn_on_secondary_cpu" : false,
"load_iua_on_secondary_cpu" : true,
"load_lapd_on_secondary_cpu" : true,
"load_m2pa_on_secondary_cpu" : true,
"load_m2ua_on_secondary_cpu" : true,
"load_m3ua_on_secondary_cpu" : true,
"load_sip_on_secondary_cpu" : true,
"sip_cong_start_thresh" : 2,
"sip_cong_stop_thresh" : 4,
"sip_critical_cong_start_thresh" : 1,
"sip_critical_cong_stop_thresh" : 3,
"sip_dynamic_mem_size" : "0 KB",
"sip_event_mem_size" : "0 KB",
"sip_extra_mem" : true,
"sip_reduced_timer_start_thresh" : 4,
"sip_reduced_timer_stop_thresh" : 5,
"sip_signal_mem_size" : "0 KB",
"sip_signal_sizes" : "",
"tdm_companding" : "aLaw",
"voip_codec_AMR" : 0,
"voip_codec_ECHO_H" : 0,
"voip_codec_ECHO_L" : 0,
"voip_codec_ECHO_M" : 0,
"voip_codec_EFR" : 0,
"voip_codec_EVRC" : 0,
"voip_codec_FR" : 0,
"voip_codec_G711_5" : 0,
"voip_codec_G711_10" : 0,
"voip_codec_G711_20" : 0,
"voip_codec_G722_2" : 0,
"voip_codec_G723" : 0,
"voip_codec_G726_10" : 0,
"voip_codec_G726_20" : 0,
"voip_codec_G728" : 0,
"voip_codec_G729A" : 0,
"voip_codec_G729EG_8" : 0,
"voip_codec_G729EG_11_8" : 0,
"voip_codec_ILBC13" : 0,
"voip_codec_ILBC15" : 0,
"voip_codec_mode" : "Mixed Mode",
"voip_codec_QCELP8" : 0,
"voip_codec_QCELP13" : 0,
"voip_codec_SMV" : 0,
"voip_codec_T38" : 0
},
"call_rate_limiting" : {
"maximum_cas_call_burst" : 0,
"maximum_cas_calls_per_second" : 0,
"maximum_isdn_call_burst" : 0,
"maximum_isdn_calls_per_second" : 0,
"maximum_sip_call_burst" : 0,
"maximum_sip_calls_per_second" : 0,
"maximum_ss7_call_burst" : 0,
"maximum_ss7_calls_per_second" : 0,
"maximum_total_call_burst" : 0,
"maximum_total_calls_per_second" : 0
},
"description" : "",
"graceful_upgrade_timeout" : 0,
"is_np1_backup" : false,
"location" : "",
"name" : "@[hardware_name]",
"serial_number" : "@[serial_number]",
"target_state" : "Enabled",
"tdm_line_type" : "E1_T1_J1",
"type" : "N+1 Patch Panel",
"bondings" : {
},
"cas_stacks" : {
},
"ethernet_ports" : {
},
"ip_interfaces" : {
},
"isdn_stacks" : {
},
"iua_stacks" : {
},
"m2pa_stacks" : {
},
"m2ua_stacks" : {
},
"mtp2_stacks" : {
},
"rtp_port_ranges" : {
},
"sctp_stacks" : {
},
"tdm_line_interfaces" : {
},
"tunnels" : {
},
"virtual_ports" : {
}
}
