ISDN/NFAS Overlap Parameters

Applies to version v2.9

Overlap parameters enable default ISDN call settings to be tailored for specific needs. If for example there is a limit of 20 digits to the called destination number and more digits are required, it is possible to adapt the configuration to use the "Overlap Sending" method.

To configure Overlap Paramters:

1- Click NAPs in the navigation panel

2- Click Edit to modify a NAP .

3- Click Overlap Params to view options.

• Set the Enable Overlap Sending checkbox.
• Set other parameters as required
  • Enter the number of digits to send in the Overlap Receiving Expected Digits field.
• Click Save

<Wiki Northbound Interface Section>

Path

/configurations/@[configuration_name]/naps/@[nap_name]

Parameters (text)

/configurations/@[configuration_name]/naps/@[nap_name]
default_profile    = "default"
isup_cic_groups    = [ "CHTI01", "CHTI02" ]
name               = "CHT_Taiwan"

/configurations/@[configuration_name]/naps/@[nap_name]/call_rate_limiting
maximum_call_burst                  = 0
maximum_calls_per_second            = 0
maximum_simultaneous_incoming_calls = 0
maximum_simultaneous_outgoing_calls = 0
maximum_simultaneous_total_calls    = 0
processing_delay_high_threshold     = "0 millisecond"
processing_delay_low_threshold      = "0 millisecond"

/configurations/@[configuration_name]/naps/@[nap_name]/tdm_cfg
append_f_to_outgoing_calls                     = true
channel_usage                                  = "Even highest CIC"
remove_trailing_f_or_pound_from_incoming_calls = true

/configurations/@[configuration_name]/naps/@[nap_name]/tdm_cfg/overlap_parameters
enable_overlap_receiving              = false
overlap_receiving_expected_digits     = 0
overlap_receiving_inter_digit_timeout = "20 seconds"
overlap_receiving_timeout             = "0 millisecond"

Parameters (json)

{
  "call_rate_limiting" : {
    "maximum_call_burst" : 0,
    "maximum_calls_per_second" : 0,
    "maximum_simultaneous_incoming_calls" : 0,
    "maximum_simultaneous_outgoing_calls" : 0,
    "maximum_simultaneous_total_calls" : 0,
    "processing_delay_high_threshold" : "0 millisecond",
    "processing_delay_low_threshold" : "0 millisecond"
  },
  "default_profile" : "@[profile_name]",
  "isup_cic_groups" : [
    "CHTI01",
    "CHTI02"
  ],
  "name" : "@[nap_name]",
  "tdm_cfg" : {
    "append_f_to_outgoing_calls" : true,
    "channel_usage" : "Even highest CIC",
    "overlap_parameters" : {
      "enable_overlap_receiving" : false,
      "overlap_receiving_expected_digits" : 0,
      "overlap_receiving_inter_digit_timeout" : "20 seconds",
      "overlap_receiving_timeout" : "0 millisecond"
    },
    "remove_trailing_f_or_pound_from_incoming_calls" : true
  }
}