Creating an M3UA Route (SGP)
Applies to version(s): v2.9, v2.10, v3.0
Now that you have configured M3UA user parts, PSPs, and peer servers, you must create M3UA routes for your system.
You require 1 route per point codes in your system. This means 1 route per DPC (SSP and STP) and 1 per source point code (OPC).
To create an M3UA route on an SGP:
1- Click M3UA in the navigation panel:
2- Select an M3ua Network:
3- Click Create New M3ua Route in the M3UA network configuration window
2- Configure the new M3UA route:
For the OPC, this route is used for the local point code and to reach the ASP.
- Enter a name for the route
- Select a route type:Psrv
- Select an M3UA peer server: Select the previously configured M3UA Peer Server with the right RC (Routing Context)
- Select an M3UA user part:NONE
- Select a point code: Select the OPC from the MTP3 linkset
- Select a point code mask (Recommended value: Exact match)
- Select a sub-service field type:ISUP or SCCP
- Click Create
For the DPC, this route is used to reach the DPC that is used in MTP3 configuration.
- Enter a name for the route
- Select a route type:Mtp3
- Select an M3UA user part: Select the previously configured M3UA User Part
- Select a point code: Select the DPC from the MTP3 linkset
- Select a point code mask (Recommended value: Exact match)
- Select a sub-service field type:ISUP or SCCP
- Click Create
3- Verify that the "M3ua Route was successfully created" message appears
Path
/configurations/@[configuration_name]/m3ua_stacks/@[m3ua_name]/m3ua_networks/@[m3ua_network]/m3ua_routes/@[m3ua_route]
Parameters (text)
/configurations/@[configuration_name]/m3ua_stacks/@[m3ua_name]/m3ua_networks/@[m3ua_network]/m3ua_routes/@[m3ua_route] m3ua_psrv = "NONE" m3ua_userpart = "NONE" name = "@[m3ua_route]" point_code = "XTEL_OPC_2106" point_code_mask = "Exact match" route_type = "Psrv" status_suppress = false subservice_field_type = "Isup" /configurations/@[configuration_name]/m3ua_stacks/@[m3ua_name]/m3ua_networks/@[m3ua_network]/m3ua_routes/@[m3ua_route]/advanced_filter_parameters cic_end = 2 cic_start = 1 include_cic = false include_ssn = false include_trid = false other_point_code = "NONE" other_point_code_mask = "Exact match" sio_mask = 0xf sls = 0 sls_mask = 0x0 ssn = 0 trid_end = 2 trid_start = 1
Parameters (json)
{
"advanced_filter_parameters" : {
"cic_end" : 2,
"cic_start" : 1,
"include_cic" : false,
"include_ssn" : false,
"include_trid" : false,
"other_point_code" : "NONE",
"other_point_code_mask" : "Exact match",
"sio_mask" : 15,
"sls" : 0,
"sls_mask" : 0,
"ssn" : 0,
"trid_end" : 2,
"trid_start" : 1
},
"m3ua_psrv" : "NONE",
"m3ua_userpart" : "NONE",
"name" : "@[m3ua_route]",
"point_code" : "XTEL_OPC_2106",
"point_code_mask" : "Exact match",
"route_type" : "Psrv",
"status_suppress" : false,
"subservice_field_type" : "Isup"
}
List of Parameters
- Name
- Route Type
- M3UA Peer Server (only if Psrv was chosen as the route type)
- M3UA Userpart
- Point Code
- Point Code Mask
- Sub-Service Field Type
