Toolpack:RADIUS CDR attributes
From TBwiki
Applies to version(s): v2.7
This page contains the list of RADIUS attributes that are sent to a RADIUS accounting server.
From RFC 2865 and RFC 2866 (Accounting) :
| Attribute ID | RADIUS IETF param name | Type | Toolpack CDR parameter | Description |
|---|---|---|---|---|
| 1 |
User-Name | string |
IncomingNAP | Incoming NAP name |
| 4 |
NAS-IP-Address | IP address |
- | IP address of the TMedia generating the CDR record |
| 30 |
Called-Sation-Id | string |
Called Number | Called party number |
| 31 |
Calling-Station-Id | string |
Calling Number | Calling party number |
| 32 |
NAS-Identifier | string |
Application Name | Application name of the CDR provider |
| 40 |
Acct-Status-Type | integer |
- | Start or Stop |
| 44 |
Acct-Session-Id | integer |
Leg Id | Call Leg Identifier |
Attribute ID 26, Vendor ID: 9 (Cisco)
| Vendor specific attribute ID | RADIUS IETF param name | Type | Toolpack param | Description |
|---|---|---|---|---|
| 2 |
Cisco-NAS-Port | string |
NAP name | Network Access Point name for the call leg |
| 24 |
h323-conf-id | string |
Unique Id | Unique call identifier for the two initial legs (incoming and outgoing) - 128 bits integer formated as xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx |
| 25 |
h323-setup-time | string |
Start Time | Represent the call leg setup time - Coordinated Universal Time (UTC) |
| 26 |
h323-call-origin | string |
Originator Name | "originate" for an outgoing leg - "answer" for an incoming leg |
| 27 |
h323-call-type | string |
Protocol Type | If protocol is SIP the value is "VOIP", otherwise it is "Telephony" |
| 28 |
h323-connect-time | string |
Connected Time | Represent the call leg answer time (connect time) - Coordinated Universal Time (UTC) |
| 29 |
h323-disconnect-time | string |
EndTime | Represent the call leg disconnect time - Coordinated Universal Time (UTC) |
| 30 |
h323-disconnect-cause | string |
Termination Reason | Q.931 disconnect (1 to 160) cause, TB Toolpack system cause (200 to 300) and SIP cause (400 to 600) |
| 35 |
h323-incoming-conf-id | string |
Unique Id | Contains the original h323-conf-id in case of call transfer for subsequent outgoing legs - 128 bits integer formated as xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx |
| 115 | release-source | string |
Termination Source | "localLeg" if this leg terminate the call or "connectedLeg" if its the connected leg - We use a Cisco string field with our own value definition |
Attribute ID 26, Vendor ID: 21776 (TelcoBridges)
| Vendor specific attribute ID | RADIUS IETF param name | Type | Toolpack param | Description |
|---|---|---|---|---|
| 9 |
Telcob-ChargeIndicator | String |
ChargeIndicator | Represent the charge indicator value |
| 10 |
Telcob-Protocol | String |
Protocol | Protocol used for this LegID. Ex. SIP, ISDN, etc. |
| 11 |
Telcob-Codec | String |
Codec | Codec used for this LegID |
| 12 |
Telcob-RemoteIP | IP address |
RemoteIP | RemoteIP used for the media. This is only for VOIP. |
| 13 |
Telcob-RemotePort | Integer |
RemotePort | RTP Port of the remote peer. This is only for VOIP. |
| 14 |
Telcob-TrunkName | String |
TrunkName | Name of the trunk (ex. "LS004400E1_0_00"). This attribute is only for non-VOIP. |
| 15 |
Telcob-TimeslotNumber | Integer |
TimeslotNumber | This is the Timeslot Number. This attribute is only for non-VOIP. |
| 16 |
Telcob-MediaInfo | String |
MediaInfo | String that represents the MediaInfo (ex. "PCMU@10.3.10.124:20054" for SIP and "LS_T1_BITS_00:1" for ISDN) |
| 17 |
Telcob-StartTime | String |
StartTime | String that represents the StartTime of the call. |
| 18 |
Telcob-ConnectedTime | String |
ConnectedTime | String that represents the time when the call was connected |
| 19 |
Telcob-EndTime | String |
EndTime | String that represents when the call was completed. |
| 20 |
Telcob-TerminationCause | Integer |
TerminationCause | Integer that represents the Termination Cause |
| 21 |
Telcob-Other-Leg-Id | Integer |
Other-Leg-Id | Integer that represents the other LegID bridged for this call |
| 22 |
Telcob-TerminationCauseString | String |
TerminationCauseString | String that represents the TerminationCause, but in a String format. |
| 23 |
Telcob-TerminationSource | String |
TerminationSource | String that represents the Termination Source |
| 24 |
Telcob-LocalSipIP* | String |
LocalSipIP | IP Address that represents the Local IP used for SIP. |
| 25 |
Telcob-LocalSipPort* | Integer |
LocalSipPort | Integer that represents the Local port used for SIP. |
| 26 |
Telcob-LocalMediaIP | IPAddr |
LocalMediaIP | IP Address that represents the Local IP used for the media. |
| 27 |
Telcob-LocalMediaPort | String |
LocalMediaPort | Integer that represents the Local port used for the media. |
| 28 |
Telcob-LocalMediaInfo | String |
LocalMediaInfo | String that represents the Local Media Info.(ex. "PCMU@10.3.10.124:20054")
Only for VOIP calls. |
| 29 |
Telcob-RemoteMediaInfo | String |
RemoteMediaInfo | String that represents the Remote Media Info.(ex. "PCMU@10.3.10.124:20054")
This is the same as Telcob-MediaInfo. Only for VOIP calls. |
| 30 |
Telcob-Alert-Time | Integer |
AlertTime | Time where the call has started ringing. |
| 31 |
Telcob-Redirecting-Number | String |
RedirectingNumber | Redirecting number |
| 32 |
Telcob-Original-Called-Number | String |
OriginalCalledNumber | Original called number |
| 33 |
Telcob-Calling-Presentation | String |
CallingPresentation | Calling presentation: "Unspecified", "NotAvailable", "Allowed", "Restricted", "AddressRestricted" or "NameRestricted" |
* = Not implemented.
