Defining a Clocking Source

Applies to version(s): v2.8.

A network clock is a necessary component of a TDM network. Synchronizing your system to a clock will ensure that a good condition of your system is maintained. It is recommended that you configure an external clocking source for your system.

To configure a clock:

1- Click Clocking in the navigation panel

2- Click Create New External System Clock Reference

3- Create the new clocking source:

• Select the appropriate hardware adapter
• Select a clock reference type (in this example, Line Service is selected)
• Select a clock reference source (in this example "Line_Service_00")

Note: In this example, Line Service is selected chosen as the reference type, and a line service is selected as the clocking source. To

4- Verify that the System Clock was successfully created message appears, and that the new clocking source appears in the External System Clock Reference List

List of Parameters

• Adapter
• Clock Reference Type
• Clock Reference Source