Creating an M3UA Peer Server

From TBwiki
Revision as of 14:39, 22 September 2014 by Allyntree (Talk | contribs)
Jump to: navigation, search

Applies to version(s): v2.8

After you create an M3UA peer signaling process (PSP), you must create a new Peer server. A peer server is a logical entity on the IP network that is served by one or more PSPs.

To create an M3UA peer server:

1- Click M3UA in the navigation panel:

CreateM3ua 0.png


2- Select an M3ua Network:

SelectM3uaNetwork A 0.png


3- Click Create New M3ua Peer Server in the M3UA network configuration window

Create M3UA Peer Server 0.png


4- Configure the new M3UA peer server:

  • Enter a name for the peer server
  • Check the Local box for local peer server (OPC). For remote peer server (DPC), do not check this box. (For signaling gateway, this option does not appear, SG uses only remote peer servers)
  • Enter a value for the routing context (must be unique within a local or non-local server list. However, this value does not need to be unique across lists).
  • Select the Traffic Mode Type. For local peer server, it indicates if one association (active-standby) or several associations (loadshare) are brought to the active state. For remote peer server, this field is used in ASPAC.
  • Click Create

Create M3UA Peer Server 1.png


5- Verify that the "M3ua Peer server was successfully created" message appears

Create M3UA Peer Server 2a.png


6- Associate the newly created peer server with a peer signaling process (PSP):

  • Select a PSP from the list of available PSPs
  • Click the "<<" button to associate the PSP with the peer server

Create M3UA Peer Server 3a.png


List of Parameters

Personal tools