Configuring an IP tunnel

Applies to version(s): v2.8.

One or more IP tunnels can be defined to manage the IP traffic betweeen two networks.

To configure an IP tunnel

1. Select IP Interfaces from the navigation panel:

2. Click Create New Tunnel:

3. Configure the range of ports:

• Enter a name for the IP tunnel
• Select a protocol for the IP tunnel
• Provide a user name and password
• Select a virtual port
• Click Create

4. Verify that the Tunnel was successfully created message is displayed.

List of Parameters

• Name
• Type
• Username
• Password
• Virtual port

Advanced Parameters

• LCP polling interval
• LCP maximum polling failure
• NaOverwrite global default gateway