Configure Fax VBD
From TBwiki
Applies to version(s): v2.9
To enable VBD:
1. Select Profiles from the navigation menu.
2. Click Create New Profile
3. Enter a name for the Fax Profile.
- Click Fax/Modem Relay to expand the view.
4. Configure the settings:
- Set Enable Fax/Modem Relay to enabled.
- Set Detection Mode to Standard.
- Set Relay Mode to Passthrough.
- Set Switch to FAX relay upon CNG tone to checked.
- Select a codec. For example silence suppression
You can set one or both of the following two parameters:
- Support V.152 VBD
- Force V.152 VBD
| Support V.152 VBD | Force V.152 VBD | Description |
|---|---|---|
|
Enabled |
Disabled |
Will negociate the gpmd parameter in the SDP. |
|
Disabled |
Enabled |
Will always use VBD. |
|
Enabled |
Enabled |
Will accept VBD without negociation and will negociate for it on an outgoing fax. |
5. Verify thet the Profile was successfully created message is displayed.
Path
Parameters (text)
Parameters (json)
