TBLinux:How to change the ip address

From TBwiki

Revision as of 08:13, 25 August 2009 by Yung (Talk | contribs)

This article will explain how to change the ip address of TMG800/TMG3200 of the Linux host.

NOTE: Only the eth0 network interface should be change, eth1 should stays at 172.31.1.2 because it is directly connected to the Tmedia base board.

Switch from dhcp to static

Modify the eth0 configuration

   vi /etc/sysconfig/network-scripts/ifcfg-eth0

NOTE: you need to remove the line DHCP_HOSTNAME

Example:

   DEVICE=eth0
   BOOTPROTO=static
   IPADDR=192.168.1.10
   NETMASK=255.255.255.0
   IPV6ADDR=
   IPV6PREFIX=
   IPV6_AUTOCONF=yes
   ONBOOT=yes

Add the default gateway address in the network configuration file

   vi /etc/sysconfig/network

Example:

   HOSTNAME=TB005376
   NETWORKING=yes
   GATEWAY=192.168.1.1

Modify the dhcp client configuration.

NOTE:If you don't have a nameserver, remove it from the file, if you do set it to a valid one(DNS).

   vi /etc/resolv.conf

Example of a dns configuration file without DNS server:

   ; generated by /sbin/dhclient-script

Example of a dns configuration file containing a DNS server (in theory the dns server should configure itself properly):

   ; generated by /sbin/dhclient-script
   nameserver 192.168.1.5

Modify toolpack.ini file the variable "TBDB_SERVER_PRI".

Example:

   TBDB_SERVER_PRI = 172.31.1.2

Modify the eth0 configuration

   vi /etc/sysconfig/network-scripts/ifcfg-eth0

NOTE: you need to remove the IPADDR and NETMASK lines

Example:

   DEVICE=eth0
   BOOTPROTO=dhcp
   IPV6ADDR=
   IPV6PREFIX=
   IPV6_AUTOCONF=yes
   ONBOOT=yes
   DHCP_HOSTNAME=TB005376

Remove the default gateway address in the network configuration file

   vi /etc/sysconfig/network

Example:

   HOSTNAME=TB005376
   NETWORKING=yes

Modify the dhcp client configuration.

NOTE:If you don't have a nameserver, remove it from the file, if you do set it to a valid one(DNS).

   vi /etc/resolv.conf

Example of a dns configuration file without DNS server:

   ; generated by /sbin/dhclient-script

Example of a dns configuration file containing a DNS server (in theory the dns server should configure itself properly):

   ; generated by /sbin/dhclient-script
   nameserver 192.168.1.5