Enabling SIP-I/SIP-T

Applies to version: v2.9, v2.10, v3.0

To enable SIP-I/SIP-T:

1- Select NAPs from the navigation panel

2- Select a SIP NAP from the Network Access Point List

3- Expand SIP-I Parameters

• Set the Enable checkbox.
• Select an ISUP Protocol Variant
• Click Save

Path

/configurations/@[configuration_name]/naps/@[nap_name]

Parameters (text)

/configurations/@[configuration_name]/naps/@[nap_name]/sip_cfg/sipi_parameters
append_f_to_outgoing_calls = false
call_progress_method       = "183 Call Progress"
content_type               = "itu-t"
enable                     = false
isup_protocol_variant      = "ITU"

Parameters (json)

{
  "call_rate_limiting" : {
    "maximum_call_burst" : 0,
    "maximum_calls_per_second" : 0,
    "maximum_simultaneous_incoming_calls" : 0,
    "maximum_simultaneous_outgoing_calls" : 0,
    "maximum_simultaneous_total_calls" : 0,
    "processing_delay_high_threshold" : "3 seconds",
    "processing_delay_low_threshold" : "1 second"
  },
  "cas_stacks" : [
  ],
  "default_profile" : "default",
  "isdn_stacks" : [
  ],
  "isup_cic_groups" : [
  ],
  "line_services" : [
  ],
  "name" : "@[nap_name]",
  "port_ranges" : [
  ],
  "sip_cfg" : {
     "sipi_parameters" : {
      "append_f_to_outgoing_calls" : false,
      "call_progress_method" : "183 Call Progress",
      "content_type" : "itu-t",
      "enable" : false,
      "isup_protocol_variant" : "ITU"
    }
  }
 }

List of Parameters

• Enable
• ISUP Protocol Variant
• Content-Type
• Call Progress Method
• Append F to outgoing calls

Related actions

SIP-I/SIP-T