Toolpack:Configuring tbSnmpAgent A

Once you are logged into the Web Portal and have successfully activated the tbSnmpAgent application, follow these steps to configure the application to suit your needs:

• Under the Applications heading, in the Web Portal navigation panel, click the Configurations tab.

• In the Application Configuration List, find the entry for tbsnmpagent and click the link labeled edit, next to that entry.

The tbSnmpAgent Application Configuration window is divided into several sections, which may be of interest to customers

1. Under the Application Params heading, the following general application parameters can be configured:
   • SNMP IP Port: the port to use for making SNMP requests (standard default value is 161)
   • SNMP System Description: the textual description that will appear when polling the sysDescr variable of the SNMPv2-MIB
   • SNMP System Object ID: the value appended to TelcoBridges' value (.1.3.6.1.4.1.21776.3) for the SNMPv2-MIB variable sysObjectId
   • SNMP System Name: the textual description that will appear when polling the sysName variable of the SNMPv2-MIB
   • SNMP System Location: the textual description that will appear when polling the sysLocation variable of the SNMPv2-MIB
   • SNMP System Contact: the textual description that will appear when polling the sysContact variable of the SNMPv2-MIB

1. Under the Advanced Params heading, the following general application parameter can be configured:
   • Polling delay to generate traps: this sets the length for the time intervals at which the SNMP agent polls for newly generated traps. The value entered is in seconds