Configure Fax Passthrough NSE

From TBwiki
Revision as of 09:06, 18 June 2012 by Clod Patry (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Applies to version(s): v2.7.

To enable passthrough with NSE, follow these steps: 

1. Make sure "Enable Fax/Modem Relay" is enabled.
2. Make sure "Detection Mode" is Standard.
3. Make sure "Relay Mode" is Passthrough.
4. Make sure "Detection type" is "Silence Suppression off"
5. Make sure the Codec is the same as the remote end.
6. Make sure "Use NSE" is checked. By unchecking this option, you will switch to Fax Passthrough using SIP re-INVITE.


Profile nse v27.png

Retrieved from "https://docs.telcobridges.com/mediawiki/index.php?title=Configure_Fax_Passthrough_NSE_A&oldid=11442"
Personal tools