Creating MTP3 Links (M3UA)

Applies to version(s): v2.5, v2.6.

Now that you have created an MTP3 linkset, you must create MTP3 links for your system. An MTP3 link is used to connect with a MTP2 link; they are connected in a one-to-one fashion.

To create an MTP3 link:

1- Click Create New Mtp3 Link in the MTP3 linkset configuration window

2- Configure the new MTP3 link:

• Enter a name for the link
• Select MTP2 as the type of link to bind
• Select an MTP2 link
• Select a priority level
• Select a Messages priority
• Set the C Link value
• Enter a Link Test Slc (this value is unique in the link list)
• Enter Link Test Characters
• Click Create

3- Verify that the "Mtp3Link was successfully created" message appears

List of Parameters

• Name
• Type of Link to Bind
• MTP2 Link
• Priority Level
• Message Priority
• C Link
• Link Test Slc
• Link Test Characters