Creating a SIP Transport Server

Applies to version(s): v2.5, v2.6.

Now that you have created a SIP stack, you must must create a new SIP transport server for your configuration.

Note: In order to employ SIP transport servers, the protocol that they will use to transport the SIP signaling traffic must be defined.

To do so:

1- Click SIP in the navigation panel

2- Click Edit next to the SIP stack for which you wish to create a transport server

3- Click Create New Transport Server under the Transport Servers list

4- Create the new SIP transport server:

• Enter a name for the server
• Select an appropriate port type
• Select an appropriate IP interface
• Click Create

5- Verify that the "SIP transport server was successfully created" message appears, and that the new server is listed in the Transport Servers list

Confirmation message.

Server appears in list.

List of Parameters

• Name
• Port Type
• IP Interface