Configuring the SNMP Agent

From TBwiki
Revision as of 13:34, 12 September 2014 by Allyntree (Talk | contribs)
Jump to: navigation, search

Applies to version(s): v2.8.

Once you have successfully activated the tbSnmpAgent application, follow these steps to configure the SNMP system parameters:


  • Click Applications in the navigation panel.

Snmp cfg 0.png

  • In the Application Configuration List, select tbsnmpagent.

Snmp cfg 1.png

  • Click Application Params

Snmp cfg 2.png

  • Enter Values for the following parameters:
    • SNMP IP Port: the IP port to use for making SNMP requests (standard default value is 161)
    • SNMP System Description: the textual description that will appear when polling the sysDescr variable of the SNMPv2-MIB
    • SNMP System Object ID: the value appended to TelcoBridges' value (.1.3.6.1.4.1.21776.3) for the SNMPv2-MIB variable sysObjectId
    • SNMP System Name: the textual description that will appear when polling the sysName variable of the SNMPv2-MIB
    • SNMP System Location: the textual description that will appear when polling the sysLocation variable of the SNMPv2-MIB
    • SNMP System Contact: the textual description that will appear when polling the sysContact variable of the SNMPv2-MIB

Snmp cfg 3.png

  • Click Advanced Params to view or change advanced settings for the following parameter(s):
    • Polling delay to generate traps: sets the length (in seconds) for the time intervals at which the SNMP agent polls for newly generated traps.
    • Use system names: indicates that SNMP uses the names interfaces of the system instead of the names interfaces generated by adapters.

Snmp cfg 4.png

  • Click Save

Snmp cfg 5.png

  • Verify that the ApplicationCfg was sucessfully updated message is displayed.

Snmp cfg 6.png

Retrieved from "https://docs.telcobridges.com/mediawiki/index.php?title=Toolpack:Configuring_tbSnmpAgent_B&oldid=16232"
Personal tools