Web Portal Tutorial Guide v2.8

	WARNING: the information on this page might be incomplete or inacurate

Introduction

This guide provides users with a scenario-based approach to installing Tmedia and Tdev systems, using the Web Portal configuration tool. Users of this guide must first complete the configuration steps that are general to all installations, and then follow the instructions that are specific to their particular application scenario (this corresponds to the type of service, and hardware system being set up).

Prerequisites

The Tmedia or Tdev devices must be installed as described in their Intsallation Guides, and in the case of the Tmedia system communication is established with the control network.

(Note: Tmedia devices are shipped with the Tmedia Web Portal pre-installed, while Tdev devices require that Toolpack be installed as described in the Tdev installation guides.)

Furthermore, in the case of a Tdev device and the initial configuration of the Toolpack application server, the following will have been provided:

• The Tdev device to which the Web Portal will first connect.
• The Tdev device will have been pre-configured with its physical TDM interface.
• The serial number of the Tdev device will have been entered into the configuration file.
• The application software for the Tdev device will have been pre-installed on the Toolpack application server, as described in the Tdev installation guides.

It is assumed that you are familiar with topics, such as ISDN signaling, SIP signaling, SS7, CAS signaling, and SIGTRAN signaling.

Key Concepts

• System: A system is defined as the complete solution that is designed for a network. If a system solution is comprised of 4 TMP6400’s and a TMS1600, then the combination of these TelcoBridges devices is termed a system.
• Hardware: Each TelcoBridges devices, whether it is a TMP6400, TMG3200, or TMS1600 is referred to as a hardware device or hardware adapter.
• Line Interface: The physical TDM module installed on the TelcoBridges device is referred to as a line interface.

Configuration Categories

The configuration of your system, using the Web Portal, is grouped into the following major categories. It is recommended that you follow this order when configuring your system.

• System Settings
  • Access and User Management
  • Database Backup
  • SNMP
  • Configuration
  • Minor Package Upgrade
  • Software Licenses
  • Statistics
  • Audit Logs

• Hardware Settings
  • New Hardware
  • TDM Network
  • IP Network

• Protocol Stack Settings
  • ISDN NFAS
  • CAS
  • SIP
  • SS7 ISUP
  • SCCP TCAP
  • H.248 MEGACO

• CDR Settings
  • Text CDR
  • RADIUS

• Fax Settings
  • FAX passthrough
  • FAX T.38

• Call Routes Settings
  • Static Route
  • Routing Script
  • Label Routing
  • RADIUS Authorization and Authentication

• Lawful Interception Settings

• Troubleshooting
  • CallTrace
  • Test Call
  • Target Recording

• Status Menus