Toolpack:RADIUS CDR attributes

Applies to version(s): v2.7

This page contains the list of RADIUS attributes that are sent to a RADIUS accounting server.

From RFC 2865 and RFC 2866 (Accounting) :

Attribute ID	RADIUS IETF param name	Type	Toolpack CDR parameter	Description
1	User-Name	string	IncomingNAP	Incoming NAP name
4	NAS-IP-Address	IP address	-	IP address of the TMedia generating the CDR record
30	Called-Station-Id	string	Called Number	Called party number
31	Calling-Station-Id	string	Calling Number	Calling party number
32	NAS-Identifier	string	Application Name	Application name of the CDR provider
40	Acct-Status-Type	integer	-	Start or Stop
44	Acct-Session-Id	integer	Leg Id	Call Leg Identifier
46	Acct-Session-Time	integer	Session duration	Duration of the call, in seconds. Corresponds to h323-disconnect-time minus h323-connect-time.

Attribute ID 26, Vendor ID: 9 (Cisco)

Vendor specific attribute ID	RADIUS IETF param name	Type	Toolpack param	Description
2	Cisco-NAS-Port	string	NAP name	Network Access Point name for the call leg
24	h323-conf-id	string	Unique Id	Unique call identifier for the two initial legs (incoming and outgoing) - 128 bits integer formated as xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
25	h323-setup-time	string	Start Time	Represent the call leg setup time - Coordinated Universal Time (UTC)
26	h323-call-origin	string	Originator Name	"originate" for an outgoing leg - "answer" for an incoming leg
27	h323-call-type	string	Protocol Type	If protocol is SIP the value is "VOIP", otherwise it is "Telephony"
28	h323-connect-time	string	Connected Time	Represent the call leg answer time (connect time) - Coordinated Universal Time (UTC)
29	h323-disconnect-time	string	EndTime	Represent the call leg disconnect time - Coordinated Universal Time (UTC)
30	h323-disconnect-cause	string	Termination Reason	Q.931 disconnect (1 to 160) cause, TB Toolpack system cause (200 to 300) and SIP cause (400 to 600)
35	h323-incoming-conf-id	string	Unique Id	Contains the original h323-conf-id in case of call transfer for subsequent outgoing legs - 128 bits integer formated as xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
115	release-source	string	Termination Source	"localLeg" if this leg terminate the call or "connectedLeg" if its the connected leg - We use a Cisco string field with our own value definition
141	call-id	String	SipCallId	Content of the "call-id" SIP header

Attribute ID 26, Vendor ID: 21776 (TelcoBridges)

Vendor specific attribute ID	RADIUS IETF param name	Type	Toolpack param	Description
9	Telcob-ChargeIndicator	String	ChargeIndicator	Represent the charge indicator value
10	Telcob-Protocol	String	Protocol	Protocol used for this LegID. Ex. SIP, ISDN, etc.
11	Telcob-Codec	String	Codec	Codec used for this LegID
12	Telcob-RemoteMediaIP	IP address	RemoteIP	RemoteIP used for the media. This is only for VOIP.
13	Telcob-RemoteMediaPort	Integer	RemotePort	RTP Port of the remote peer. This is only for VOIP.
14	Telcob-TrunkName	String	TrunkName	Name of the trunk (ex. "LS004400E1_0_00"). This attribute is only for non-VOIP.
15	Telcob-TimeslotNumber	Integer	TimeslotNumber	This is the Timeslot Number. This attribute is only for non-VOIP.
16	Telcob-MediaInfo	String	MediaInfo	String that represents the MediaInfo (ex. "PCMU@10.3.10.124:20054" for SIP and "LS_T1_BITS_00:1" for ISDN)
17	Telcob-StartTime	String	StartTime	String that represents the StartTime of the call.
18	Telcob-ConnectedTime	String	ConnectedTime	String that represents the time when the call was connected
19	Telcob-EndTime	String	EndTime	String that represents when the call was completed.
20	Telcob-TerminationCause	Integer	TerminationCause	Integer that represents the Termination Cause
21	Telcob-Other-Leg-Id	Integer	Other-Leg-Id	Integer that represents the other LegID bridged for this call
22	Telcob-TerminationCauseString	String	TerminationCauseString	String that represents the TerminationCause, but in a String format.
23	Telcob-TerminationSource	String	TerminationSource	String that represents the Termination Source
24	Telcob-LocalSipIP*	IPAddr	LocalSipIP	IP Address that represents the Local IP used for SIP.
25	Telcob-LocalSipPort*	Integer	LocalSipPort	Integer that represents the Local port used for SIP.
26	Telcob-LocalMediaIP	IPAddr	LocalMediaIP	IP Address that represents the Local IP used for the media.
27	Telcob-LocalMediaPort	Integer	LocalMediaPort	Integer that represents the Local port used for the media.
28	Telcob-LocalMediaInfo	String	LocalMediaInfo	String that represents the Local Media Info.(ex. "PCMU@10.3.10.124:20054") Only for VOIP calls.
29	Telcob-RemoteMediaInfo	String	RemoteMediaInfo	String that represents the Remote Media Info.(ex. "PCMU@10.3.10.124:20054") This is the same as Telcob-MediaInfo. Only for VOIP calls.
30	Telcob-Alert-Time	String	AlertTime	Time where the call has started ringing.
31	Telcob-Redirecting-Number	String	RedirectingNumber	Redirecting number
32	Telcob-Original-Called-Number	String	OriginalCalledNumber	Original called number
33	Telcob-Calling-Presentation	String	CallingPresentation	Calling presentation: "Unspecified", "NotAvailable", "Allowed", "Restricted", "AddressRestricted" or "NameRestricted"
34	Telcob-CallingSubscriberNumber	String	CallingSubscriberNumber	Second calling number (ISDN) or Generic number of type additional calling party number (SS7)
35	Telcob-OriginalCause	String	OriginalCause	String that represents the Original Termination Cause in a String format.
36	Telcob-CustomCdrValue	String	In routing script: params[:bridge][:CustomCdrValue] or routes[0..X][:CustomCdrValue]	String that needs to appear in CDR. If you want to have the same string in all legs, set params[:bridge][:CustomCdrValue] to the value required. If you want to have a custom string for each route, set routes[0..X][:CustomCdrValue]
100	Telcob-RtpRxPackets	Integer	From TBCMC_LEG_STATS	Number of packets received from the IP network (audio + comfort noise + signaling)
101	Telcob-RtpRxVoiceBytes	Integer	From TBCMC_LEG_STATS	Number of payload bytes from voice (audio) packets received from the IP network
102	Telcob-RtpRxVoiceDuration	Integer	From TBCMC_LEG_STATS	Duration (in seconds) of voice (audio), from IP to TDM direction
103	Telcob-RtpRxMaxPlayoutDelay	Integer	From TBCMC_LEG_STATS	Maximum (for the whole call) IP to TDM audio delay in millisecond (adaptive jitter buffer delay)
120	Telcob-RtpRxErrors	Integer	From TBCMC_LEG_STATS	Total of all detected errors in the 'Rx' direction
121	Telcob-RtpRxLostPackets	Integer	From TBCMC_LEG_STATS	Number of packets lost (never received for play-out to TDM)
130	Telcob-RtpTxPackets	Integer	From TBCMC_LEG_STATS	Number of packets sent to the IP network (audio + comfort noise + signaling)
132	Telcob-RtpTxVoiceDuration	Integer	From TBCMC_LEG_STATS	Duration (in seconds) of voice (audio), from TDM to IP direction
150	Telcob-RtpTxErrors	Integer	From TBCMC_LEG_STATS	Total of all detected errors in the 'Tx' direction
151	Telcob-RtpTxLostPackets	Integer	From TBCMC_LEG_STATS	Number of packets considered "lost" by remote side (only available if RTCP is used)
152	Telcob-RtpTxArpFailure	Integer	From TBCMC_LEG_STATS	Number of failures to ARP remote IP address to send RTP packets to (preventing sending any packets)
160	Telcob-RtcpJitter	Integer	From TBCMC_LEG_STATS	Inter-packet interval jitter, in millisecond

* = Not implemented.

Radius Accounting dictionary

• The Radius accounting dictionary is located on the TMG unit's filesystem at this location:

/lib/tb/toolpack/pkg/[version]/web/radius_dictionary

For example:

 /lib/tb/toolpack/pkg/2.7.148/web/radius_dictionary

If you do not have access, please contact TelcoBridges support to get a copy.

Radius AAA sample

• File:TelcoBridges RADIUS Auth&Acct.pcap
• File:TelcoBridges RADIUS Auth&Acct.txt