Applies to version(s): v2.8.
This article provides the configuration steps required to complete the most common network configurations.
It explain how to configure the IP network and how to pass this configuration to the other menus.
One subnets, Two IP Address, untagged
[image of network configuration 1]
| Configure IP Network A
|
Configure IP Network B
|
|
Subnet A uses the MGMT0 and because it is untagged, can only change with tbchangeip
|
Subnet B uses untag bonded over VOIP0 and VOIP1 ports
|
| Configure SIP
|
Configure SIGTRAN
|
Configure H.248
|
Configure RADIUS
|
|
|
|
|
|
|
Two subnets, One IP per subnet, untagged
[image of network configuration 2]
| Configure IP Network A
|
Configure IP Network B
|
|
Subnet A uses the MGMT0 and because it is untagged, can only change with tbchangeip
|
Subnet B uses untag bonded over VOIP0 and VOIP1 ports
|
| Configure SIP
|
Configure SIGTRAN
|
Configure H.248
|
Configure RADIUS
|
|
|
|
|
|
|
Two VLAN, Three IP Address, tagged
[image of network configuration 3]
| Configure IP Network A
|
Configure IP Network B
|
|
|
Subnet B uses untag bonded over VOIP0 and VOIP1 ports
|
| Configure SIP
|
Configure SIGTRAN
|
Configure H.248
|
Configure RADIUS
|
|
|
|
|
|
|
