Enabling Local NAT Traversal

From TBwiki
Revision as of 14:09, 30 November 2015 by Allyntree (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Applies to version: v2.9.


To enable Local NAT Traversal:

1- Select NATs from the navigation panel.

EnableLocalNatTraversal 0.png


2- Click Create New NAT Traversal

EnableLocalNatTraversal 1.png


3- Enter a meaningful name.

  • Choose a Local Method.
  • If necessary, provide an extra parameter.
  • Click Create

EnableLocalNatTraversal 2.png


Once the NAT configuration is completed, it must be associated with a NAP.


3- Select NAPs from the navigation panel

EnableLocalNatTraversal 3.png


4- Select a SIP NAP from the Network Access Point list

EnableLocalNatTraversal 4.png


5- In the Network Address Translation section:

  • Choose the desired "Local Method". The select box will contain the same name as the Local NAT configuration, that you provided in step #2.
  • Click Save

EnableLocalNatTraversal 5.png


The following describes the 2 Local NAT Traversal Methods:

No NAT

This method is used if you are not behind a NAT. This is the default value.

Force Public IP

This method will set some of the SIP Headers and SDP fields with the IP address that you set.


 [Northbound Interface


Related actions

Symmetric NAT traversal

Personal tools