Creating M2UA Links

Applies to version(s): v2.9

AFter you create an M2UA cluster, you must create M2UA links for your system.

An M2UA link is always bound to an MTP2 link, and can be seen a way of extending MTP2 functionality.

To create an M2UA link:

1- Click M2UA in the navigation panel

2- Select an M2UA SAP

3- Select an M2UA Cluster

4- Click Create New M2ua Link in the M2UA cluster configuration window:

5- Configure the new M2UA link:

• Enter a name for the link
• IMPORTANT!
  • For a system on a signaling gateway: Select an MTP2 link
  • For a system on a media gateway controller: Select NONE
• Select a protocol type (same as MTP2)
• Select an interface ID type
• Enter an appropriate interface ID (must be unique to each link)
• Click Create

6- Verify that the "M2ua Link was successfully created" message appears

Path

Parameters (text)

Parameters (json)

List of Parameters

• Name
• MTP2 Link
• Protocol Type
• Interface ID Type
• Interface ID