Creating a SIP Transport Server

Applies to version(s): v2.9.

After you create a SIP stack, you must must create a new SIP transport server for your SIP configuration.

Note: In order to employ SIP transport servers, the protocol that they will use to transport the SIP signaling traffic must be defined.

To do so:

1- Click SIP in the navigation panel

2- Select a SIP stack for which you wish to create a transport server

3- Click Create New Transport Server

4- Create the new SIP transport server:

• Enter a name for the server
• Select an appropriate port type
• Select an appropriate IP interface
• Click Create

5- Verify that the "SIP transport server was successfully created" message appears, and that the new server is listed in the Transport Servers list

Path

Parameters (text)

/configurations/@[configuration_name]/sip_stacks/@[sipStack_Name]/transport_servers/@[sipTransportServer_name]
ip_header_tos = 0
ip_interface  = "@[hardware_name].@[voip_Name]"
name          = "@[sipStack_Name]"
port          = 5060
port_type     = "UDP"

Parameters (json)

{
  "ip_header_tos" : 0,
  "ip_interface" : "@[hardware_name].@[voip_Name]",
  "name" : "@[sipStack_Name]",
  "port" : 5060,
  "port_type" : "UDP"
}

List of Parameters

• Name
• Port Type
• Port
• IP Interface