Toolpack: Enabling CDR

Applies to version(s): v2.7

To enable CDR:

1- Select Gateway from the navigation panel.

2- Select Use CDR behavior to enable it.

3- Configure the CDR behavior in the CDR Options section:

• Enable periodic CDR update will add one entry in the CDR per Periodic CDR update time, in minutes.
• Select a Text CDR mode from the CDR Mode :
  • Text CDR only: Will store the CDRs in a flat file. See Text CDR
  • RADIUS CDR only: Will send the CDR to an external RADIUS Server. See Radius CDR
  • Text and RADIUS CDR: Will store the CDRs in a flat file and send the CDR to an external RADIUS Server.
  • RADIUS CDR with Text CDR Fallback: Will send the CDR to an external RADIUS Server and if the RADIUS server cannot handle the load of CDRs, they will be stored in a flat file.

• Click Save to save your changes.

4- Expand the Text CDR parameters section

• Configure the Text CDR parameters as required. Refer to the description of parameters described below.

List of Parameters

• CDR log file path
• CDR format (start)
• CDR format (update)
• CDR format (end)
• Rotation delay in seconds
• Max total size of gzipped CDR logs