Enable the Session Border Gateway

Applies to version(s): v2.10

The session border gateway feature is enabled by default. To verify or change the setting, do the following:

1-Click SBC in the navigation panel.

2-Verify that Enabled is checked

3- Click Save

Path

/configurations/@[configuration_name]/hardware_units/@[hardware_name]

Parameters (text)

/configurations/@[configuration_name]/hardware_units/@[hardware_name]
description              = ""
graceful_upgrade_timeout = 0
is_np1_backup            = false
location                 = ""
name                     = "@[hardware_name]"
serial_number            = "@[serial_number]"
target_state             = "Enabled"
tdm_line_type            = "E1_T1_J1"
type                     = "TDM/IP Gateway"

Parameters (json)

List of Parameters

SBC Rule

• Enabled
• Name
• Type
• Description

SBC Filter

• Name
• IP Interface
• Protocol
• Source IP
• Source Netmask
• Source Port
• Destination Port
• Override Default Thresholds