TSBC-SW Initial Configuration
Applies to version(s): v3.0
Initial configuration of the TSBC-SW is done through a web browser (Chrome, Firefox or other). Before starting, you need these information:
- Activation key: it has the format VTB-XXX-XXXX. If you do not have this key, please contact our sales team
- Hostname of the unit. It is important to set the hostname correctly and not modify it later, otherwise you will need a new license
- Is the system used as a standalone unit or is it used in a Primary/Secondary configuration?
- Does the system require external transcoding? As an example, G.711 to G.729a transcoding
- Role of each of the network interfaces
Then, follow the procedure below.
Initial configuration of the TSBC-SW
1- Open a web browser to the IP of your server, on port 12358. Example if your server address is 192.168.178.30, the URL would be:
http://192.168.178.30:12358
2- You will get the TSBC Configuration Wizard and click on Continue
3- You need to accept the EULA agreement
4- Enter your activation key and hostname
5- Select the configuration of your SBC - either standalone, or in a Primary/Secondary configuration
6- If the system requires external transcoding, select it here. As an example, if the system needs G.711 to G.729a transcoding, then select yes.
7- Here you will choose the role of the network adapters in the system here is a short description of each type:
- mgmt: Used for management of the system
- ctrl0: Used for communication with the external transcoding devices
- ctrl1: Same as ctrl0. Adds redundancy
- LAN0: SIP/RTP access to private network
- WAN0: SIP/RTP Access to public network
8- You can select the "+" sign to get more information on this interface
9- Once completed, you will be asked get the license seed of this unit to allow for license installation. Please go here for instructions: Toolpack:Retreiving_a_License_TSBC_A
To get help, please contact TelcoBridges TB Support.
