Creating an IUA Cluster

Applies to version(s): v2.9, v2.10, v3.0

After you create an IUA SAP, you must create an IUA cluster for your system.

To create an IUA cluster:

1- Click IUA in the navigation panel

2- Select an IUA SAP

3- Click Create New Iua Cluster in the IUA SAP configuration window

4- Configure the new IUA cluster:

• Enter a name for the cluster
• Select a traffic mode
• Select a load share mode
• Click Create

5- Verify that the "Iua Cluster was successfully created" message appears

Path

/configurations/@[configuration_name]/hardware_units/@[hardware_name]/iua_stacks/@[iua_stack]/iua_saps/@[iua_sap]/iua_clusters/@[iua_cluster]

Parameters (text)

/configurations/@[configuration_name]/hardware_units/@[hardware_name]/iua_stacks/@[iua_stack]/iua_saps/@[iua_sap]/iua_clusters/@[iua_cluster]
loadshare_mode      = "PER_LINK"
name                = "@[iua_cluster]"
traffic_mode        = "ACTIVE_STANDBY"

/configurations/Allyn_Config2/hardware_units/TB014369/iua_stacks/Iua0/iua_saps/IuaSap/iua_clusters/IuaCluster/advanced_parameters
min_simultaneous_active_peer = 1
msg_queue_size               = 16

Parameters (json)

{
  "advanced_parameters" : {
    "min_simultaneous_active_peer" : 1,
    "msg_queue_size" : 16
  },
  "loadshare_mode" : "PER_LINK",
  "name" : "@[iua_cluster]",
  "traffic_mode" : "ACTIVE_STANDBY"
}

List of Parameters

• Name
• Traffic Mode
• Load Share Mode