Toolpack:RADIUS CDR attributes
From TBwiki
Applies to version(s): v3.0
This page contains the list of RADIUS attributes that are sent to a RADIUS accounting server.
From RFC 2865 and RFC 2866 (Accounting) :
| Attribute ID | RADIUS IETF param name | Type | Text CDR variable | Description |
|---|---|---|---|---|
| 1 |
User-Name | string |
@{IncomingNAP} | Incoming NAP name |
| 2 |
User-Password | string |
||
| 3 |
CHAP-Password | string |
||
| 4 |
NAS-IP-Address | IP address |
IP address of the TMedia generating the CDR record | |
| 3 |
CHAP-Password | string |
||
| 5 |
NAS-Port | string |
||
| 6 |
Service-Type | string |
||
| 7 |
Framed-Protocol | string |
||
| 8 |
Framed-IP-Address | string |
||
| 9 |
Framed-IP-Netmask | string |
||
| 10 |
Framed-Routing | string |
||
| 11 |
Filter-Id | string |
||
| 12 |
Framed-MTU | string |
||
| 13 |
Framed-Compression | string |
||
| 14 |
Login-IP-Host | string |
||
| 15 |
Login-Service | string |
||
| 16 |
Login-TCP-Port | string |
||
| 18 |
Reply-Message | string |
||
| 19 |
Callback-Number | string |
||
| 20 |
Callback-Id | string |
||
| 22 |
CHAP-Password | string |
||
| 23 |
CHAP-Password | string |
||
| 24 |
CHAP-Password | string |
||
| 25 |
CHAP-Password | string |
||
| 26 |
CHAP-Password | string |
||
| 27 |
CHAP-Password | string |
||
| 28 |
CHAP-Password | string |
||
| 29 |
CHAP-Password | string |
||
| 30 |
Called-Station-Id | string |
@{CalledNumber} | Called party number |
| 31 |
Calling-Station-Id | string |
@{CallingNumber} | Calling party number |
| 32 |
NAS-Identifier | string |
@{CallingNumber} | Application name of the CDR provider |
| 40 |
Acct-Status-Type | integer |
@{StatusType} | Start or Stop |
| 44 |
Acct-Session-Id | integer |
@{LegId} | Call Leg Identifier |
| 46 |
Acct-Session-Time | integer |
@{CallDuration} | Duration of the call, in seconds. Corresponds to h323-disconnect-time minus h323-connect-time. |
Attribute ID 26, Vendor ID: 9 (Cisco)
| Vendor specific attribute ID | RADIUS IETF param name | Type | Text CDR variable | Description |
|---|---|---|---|---|
| 2 |
Cisco-NAS-Port | string |
@{NAP} | Network Access Point name for the call leg |
| 24 |
h323-conf-id | string |
@{SessionId} | Unique call identifier for the two initial legs (incoming and outgoing) - 128 bits integer formated as xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx. Note: Starting with Toolpack 2.9, this id is now globally unique (unique across different TMedia systems). |
| 25 |
h323-setup-time | string |
@{StartTime} | Represent the call leg setup time - Coordinated Universal Time (UTC) |
| 26 |
h323-call-origin | string |
@{OriginatorName} | "originate" for an outgoing leg - "answer" for an incoming leg |
| 27 |
h323-call-type | string |
@{CallType} | If protocol is SIP the value is "VOIP", otherwise it is "Telephony" |
| 28 |
h323-connect-time | string |
@{ConnectedTime} | Represent the call leg answer time (connect time) - Coordinated Universal Time (UTC) |
| 29 |
h323-disconnect-time | string |
@{EndTime} | Represent the call leg disconnect time - Coordinated Universal Time (UTC) |
| 30 |
h323-disconnect-cause | string |
@{TerminationCause} | Q.931 disconnect (1 to 160) cause, TB Toolpack system cause (200 to 300) and SIP cause (400 to 600) |
| 35 |
h323-incoming-conf-id | string |
@{OriginalSessionId} | Contains the original h323-conf-id in case of call transfer for subsequent outgoing legs - 128 bits integer formated as xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx. Note: Starting with Toolpack 2.9, this id is now globally unique (unique across different TMedia systems). |
| 115 | release-source | string |
@{TerminationSource} | "localLeg" if this leg terminate the call or "connectedLeg" if its the connected leg - We use a Cisco string field with our own value definition |
| 141 |
call-id | String |
@{SipCallId} | Content of the "call-id" SIP header |
Attribute ID 26, Vendor ID: 21776 (TelcoBridges)
| Vendor specific attribute ID | RADIUS IETF param name | Type | Text CDR variable | Description |
|---|---|---|---|---|
| 9 |
Telcob-ChargeIndicator | String |
@{ChargeIndicator} | Represent the charge indicator value |
| 10 |
Telcob-Protocol | String |
@{Protocol} | Protocol used for this LegID. Ex. SIP, ISDN, etc. |
| 11 |
Telcob-Codec | String |
@{Codec} | Codec used for this LegID |
| 12 |
Telcob-RemoteMediaIP | IP address |
@{RemoteMediaIP} | RemoteIP used for the media. This is only for VOIP. |
| 13 |
Telcob-RemoteMediaPort | Integer |
@{RemoteMediaPort} | RTP Port of the remote peer. This is only for VOIP. |
| 14 |
Telcob-TrunkName | String |
@{TrunkName} | Name of the trunk (ex. "LS004400E1_0_00"). This attribute is only for non-VOIP. |
| 15 |
Telcob-TimeslotNumber | Integer |
@{TimeslotNumber} | This is the Timeslot Number. This attribute is only for non-VOIP. |
| 16 |
Telcob-MediaInfo | String |
@{RemoteMediaInfo} | String that represents the MediaInfo (ex. "PCMU@10.3.10.124:20054" for SIP and "LS_T1_BITS_00:1" for ISDN) |
| 17 |
Telcob-StartTime | String |
@{StartTime} | String that represents the StartTime of the call. |
| 18 |
Telcob-ConnectedTime | String |
@{ConnectedTime} | String that represents the time when the call was connected |
| 19 |
Telcob-EndTime | String |
@{EndTime} | String that represents when the call was completed. |
| 20 |
Telcob-TerminationCause | Integer |
@{TerminationCause} | Integer that represents the Termination Cause |
| 21 |
Telcob-Other-Leg-Id | Integer |
@{OtherLegId} | Integer that represents the other LegID bridged for this call |
| 22 |
Telcob-TerminationCauseString | String |
@{TerminationCauseString} | String that represents the TerminationCause, but in a String format. |
| 23 |
Telcob-TerminationSource | String |
@{TerminationSource} | String that represents the Termination Source |
| 24 |
Telcob-LocalSipIP* | IPAddr |
- | IP Address that represents the Local IP used for SIP. |
| 25 |
Telcob-LocalSipPort* | Integer |
- | Integer that represents the Local port used for SIP. |
| 26 |
Telcob-LocalMediaIP | IPAddr |
@{LocalMediaIP} | IP Address that represents the Local IP used for the media. |
| 27 |
Telcob-LocalMediaPort | Integer |
@{LocalMediaPort} | Integer that represents the Local port used for the media. |
| 28 |
Telcob-LocalMediaInfo | String |
@{LocalMediaInfo} | String that represents the Local Media Info.(ex. "PCMU@10.3.10.124:20054")
Only for VOIP calls. |
| 29 |
Telcob-RemoteMediaInfo | String |
@{RemoteMediaInfo} | String that represents the Remote Media Info.(ex. "PCMU@10.3.10.124:20054")
This is the same as Telcob-MediaInfo. Only for VOIP calls. |
| 30 |
Telcob-Alert-Time | String |
@{AlertTime} | Time where the call has started ringing. |
| 31 |
Telcob-Redirecting-Number | String |
@{RedirectingNumber} | Redirecting number |
| 32 |
Telcob-Original-Called-Number | String |
@{OriginalCalledNumber} | Original called number |
| 33 |
Telcob-Calling-Presentation | String |
@{CallingPresentation} | Calling presentation: "Unspecified", "NotAvailable", "Allowed", "Restricted", "AddressRestricted" or "NameRestricted" |
| 34 |
Telcob-CallingSubscriberNumber | String |
@{CallingSubscriberNumber} | Second calling number (ISDN) or Generic number of type additional calling party number (SS7) |
| 35 |
Telcob-OriginalCause | String |
@{OriginalCause} | String that represents the Original Termination Cause in a String format. |
| 36 |
Telcob-CustomCdrValue | String |
In routing script: params[:bridge][:CustomCdrValue] or routes[0..X][:CustomCdrValue] | String that needs to appear in CDR. If you want to have the same string in all legs, set params[:bridge][:CustomCdrValue] to the value required. If you want to have a custom string for each route, set routes[0..X][:CustomCdrValue] |
| 100 |
Telcob-RtpRxPackets | Integer |
@{Stat:Rtp:Rx:Packets} | Number of packets received from the IP network (audio + comfort noise + signaling) |
| 101 |
Telcob-RtpRxVoiceBytes | Integer |
@{Stat:Rtp:Rx:Packets} | Number of payload bytes from voice (audio) packets received from the IP network |
| 102 |
Telcob-RtpRxVoiceDuration | Integer |
@{Stat:Rtp:Rx:VoiceDuration} | Duration (in seconds) of voice (audio), from IP to TDM direction |
| 103 |
Telcob-RtpRxMaxPlayoutDelay | Integer |
@{Stat:Rtp:Rx:VoiceDuration} | Maximum (for the whole call) IP to TDM audio delay in millisecond (adaptive jitter buffer delay) |
| 120 |
Telcob-RtpRxErrors | Integer |
@{Stat:Rtp:Rx:Errors} | Total of all detected errors in the 'Rx' direction |
| 121 |
Telcob-RtpRxLostPackets | Integer |
@{Stat:Rtp:Rx:Error:LostPackets} | Number of packets lost (never received for play-out to TDM) |
| 130 |
Telcob-RtpTxPackets | Integer |
@{Stat:Rtp:Tx:Packets} | Number of packets sent to the IP network (audio + comfort noise + signaling) |
| 132 |
Telcob-RtpTxVoiceDuration | Integer |
@{Stat:Rtp:Tx:VoiceDuration} | Duration (in seconds) of voice (audio), from TDM to IP direction |
| 150 |
Telcob-RtpTxErrors | Integer |
@{Stat:Rtp:Tx:Errors} | Total of all detected errors in the 'Tx' direction |
| 151 |
Telcob-RtpTxLostPackets | Integer |
@{Stat:Rtp:Tx:Error:LostPackets} | Number of packets considered "lost" by remote side (only available if RTCP is used) |
| 152 |
Telcob-RtpTxArpFailure | Integer |
@{Stat:Rtp:Tx:Error:ArpFailure} | Number of failures to ARP remote IP address to send RTP packets to (preventing sending any packets) |
| 160 |
Telcob-RtcpJitter | Integer |
@{Stat:Rtcp:Jitter} | Inter-packet interval jitter, in millisecond |
* = Not implemented.
The column Text CDR Variable provide the reference to the corresponding variable in the text CDRs. See the Text-based call detail records.
Radius Accounting dictionary
- The Radius accounting dictionary is located on the TMG unit's filesystem at this location:
/lib/tb/toolpack/pkg/[version]/web/radius_dictionary
For example:
/lib/tb/toolpack/pkg/2.7.148/web/radius_dictionary
If you do not have access, please contact TelcoBridges support to get a copy.
