Toolpack:RADIUS CDR attributes

Applies to version(s): v3.0

This page contains the list of RADIUS attributes that are sent to a RADIUS accounting server.

From RFC 2865 and RFC 2866 (Accounting) :

Attribute ID	RADIUS IETF param name	Type	Text CDR variable	Description
1	User-Name	string	@{IncomingNAP}	Incoming NAP name
2	User-Password	string
3	CHAP-Password	string
4	NAS-IP-Address	IP address		IP address of the TMedia generating the CDR record
3	CHAP-Password	string
5	NAS-Port	integer
6	Service-Type	integer
7	Framed-Protocol	integer
8	Framed-IP-Address	string
9	Framed-IP-Netmask	string
10	Framed-Routing	integer
11	Filter-Id	string
12	Framed-MTU	integer
13	Framed-Compression	integer
14	Login-IP-Host	IP address
15	Login-Service	integer
16	Login-TCP-Port	integer
18	Reply-Message	string
19	Callback-Number	string
20	Callback-Id	string
22	Framed-Route	string
23	Framed-IPX-Network	IP address
24	State	string
25	Class	string
26	Vendor-Specific	string
27	Session-Timeout	integer
28	Idle-Timeout	integer
29	Termination-Action	integer
30	Called-Station-Id	string	@{CalledNumber}	Called party number
31	Calling-Station-Id	string	@{CallingNumber}	Calling party number
32	NAS-Identifier	string	@{CallingNumber}	Application name of the CDR provider
33	Proxy-State	string
34	Login-LAT-Service	string
35	Login-LAT-Node	string
36	Login-LAT-Group	string
37	Framed-AppleTalk-Link	integer
38	Framed-AppleTalk-Network	integer
39	Framed-AppleTalk-Zone	string
40	Acct-Status-Type	integer	@{StatusType}	Start or Stop
41	Acct-Delay-Time	integer
42	Acct-Input-Octets	integer
43	Acct-Output-Octets	integer
44	Acct-Session-Id	string	@{LegId}	Call Leg Identifier
45	Acct-Authentic	integer
46	Acct-Session-Time	integer	@{CallDuration}	Duration of the call, in seconds. Corresponds to h323-disconnect-time minus h323-connect-time.
47	Acct-Input-Packets	integer
48	Acct-Output-Packets	integer
49	Acct-Terminate-Cause	integer
50	Acct-Multi-Session-Id	string
51	Acct-Link-Count	integer

Attribute ID 26, Vendor ID: 9 (Cisco)

Vendor specific attribute ID	RADIUS IETF param name	Type	Text CDR variable	Description
1	Cisco-AVPair	string
2	Cisco-NAS-Port	string	@{NAP}	Network Access Point name for the call leg
3	Cisco-Fax-Account-Id-Origin	string
4	Cisco-Fax-Msg-Id	string
5	Cisco-Fax-Pages	string
6	Cisco-Fax-Coverpage-Flag	string
7	Cisco-Fax-Modem-Time	string
8	Cisco-Fax-Connect-Speed	string
9	Cisco-Fax-Recipient-Count	string
10	Cisco-Fax-Process-Abort-Flag	string
11	Cisco-Fax-Dsn-Address	string
12	Cisco-Fax-Dsn-Flag	string
13	Cisco-Fax-Mdn-Address	string
14	Cisco-Fax-Mdn-Flag	string
15	Cisco-Fax-Auth-Status	string
16	Cisco-Email-Server-Address	string
17	Cisco-Email-Server-Ack-Flag	string
18	Cisco-Gateway-Id	string
19	Cisco-Call-Type	string
20	Cisco-Port-Used	string
21	Cisco-Abort-Cause	string
23	h323-remote-address	string
24	h323-conf-id	string	@{SessionId}	Unique call identifier for the two initial legs (incoming and outgoing) - 128 bits integer formated as xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx. Note: Starting with Toolpack 2.9, this id is now globally unique (unique across different TMedia systems).
25	h323-setup-time	string	@{StartTime}	Represent the call leg setup time - Coordinated Universal Time (UTC)
26	h323-call-origin	string	@{OriginatorName}	"originate" for an outgoing leg - "answer" for an incoming leg
27	h323-call-type	string	@{CallType}	If protocol is SIP the value is "VOIP", otherwise it is "Telephony"
28	h323-connect-time	string	@{ConnectedTime}	Represent the call leg answer time (connect time) - Coordinated Universal Time (UTC)
29	h323-disconnect-time	string	@{EndTime}	Represent the call leg disconnect time - Coordinated Universal Time (UTC)
30	h323-disconnect-cause	string	@{TerminationCause}	Q.931 disconnect (1 to 160) cause, TB Toolpack system cause (200 to 300) and SIP cause (400 to 600)
31	h323-voice-quality	string
33	h323-gw-id	string
35	h323-incoming-conf-id	string	@{OriginalSessionId}	Contains the original h323-conf-id in case of call transfer for subsequent outgoing legs - 128 bits integer formated as xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx. Note: Starting with Toolpack 2.9, this id is now globally unique (unique across different TMedia systems).
101	h323-credit-amount	string
102	h323-credit-time	string
103	h323-return-code	string
104	h323-prompt-id	string
105	h323-time-and-day	string
106	h323-redirect-number	string
107	h323-preferred-lang	string
108	h323-redirect-ip-address	string
109	h323-billing-model	string
110	h323-currency	string
111	subscriber	string
112	gw-rxd-cdn	string
113	gw-final-xlated-cdn	string
114	remote-media-address	string
115	release-source	string	@{TerminationSource}	"localLeg" if this leg terminate the call or "connectedLeg" if its the connected leg - We use a Cisco string field with our own value definition
116	gw-rxd-cgn	string
117	gw-final-xlated-cgn	string
141	call-id	String	@{SipCallId}	Content of the "call-id" SIP header
142	session-protocol	string
143	method	string
144	prev-hop-via	string
145	prev-hop-ip	string
146	incoming-req-uri	string
147	outgoing-req-uri	string
148	next-hop-ip	string
149	next-hop-dn	string
150	sip-hdr	string
187	Cisco-Multilink-ID	integer
188	Cisco-Num-In-Multilink	integer
190	Cisco-Pre-Input-Octets	integer
191	Cisco-Pre-Output-Octets	integer
192	Cisco-Pre-Input-Packets	integer
193	Cisco-Pre-Output-Packets	integer
194	Cisco-Maximum-Time	integer
195	Cisco-Disconnect-Cause	integer
197	Cisco-Data-Rate	integer
198	CCisco-PreSession-Time	integer
208	Cisco-PW-Lifetime	integer
209	Cisco-IP-Direct	integer
210	Cisco-PPP-VJ-Slot-Comp	integer
212	Cisco-PPP-Async-Map	integer
217	Cisco-IP-Pool-Definition	string
218	Cisco-Assign-IP-Pool	integer
228	Cisco-Route-IP	integer
233	Cisco-Link-Compression	integer
234	Cisco-Target-Util	integer
235	Cisco-Maximum-Channels	integer
242	Cisco-Data-Filter	integer
243	Cisco-Call-Filter	integer
244	Cisco-Idle-Limit	integer
250	Cisco-Account-Info	string
251	Cisco-Service-Info	string
252	Cisco-Command-Code	string
253	Cisco-Control-Info	string
255	Cisco-Xmit-Rate	integer

Attribute ID 26, Vendor ID: 21776 (TelcoBridges)

Vendor specific attribute ID	RADIUS IETF param name	Type	Text CDR variable	Description
1	Telcob-Timestamp	string	@{Timestamp}	Time when this CDR log entry was created. Should not be used for billing purposes. Use @{EndTime} for billing @{EndTime} reports the time where the call has started terminating (hangup), while @{Timestamp} the time where signaling confirmed the termination.
2	Telcob-LegId	integer	@{LegId}	Unique Id for this leg (32 bits value).
3	Telcob-LinkId	integer	@{LinkId}	Same meaning as @{OriginalSessionId}, but presented as a 32 bits integer value.
4	Telcob-ApplicationName	string	@{ApplicationName}	Name of the application that has written this log ("Gateway")
5	Telcob-NAP	string	@{NAP}	Name of the NAP this call leg is from
6	Telcob-CallingNumber	string	@{CallingNumber}	Calling number
7	Telcob-CalledNumber	string	@{CalledNumber}	Called number
8	Telcob-OrginatorName	string	@{OriginatorName}	Direction of the call: "answer" (incoming call leg), "originate" (outgoing call leg)
9	Telcob-ChargeIndicator	String	@{ChargeIndicator}	For TDM (SS7 and CAS R2); received charge indicator in Alert message.
10	Telcob-Protocol	String	@{Protocol}	Protocol used for this LegID. Ex. SIP, ISDN, etc.
11	Telcob-Codec	String	@{Codec}	Codec used for this LegID
12	Telcob-RemoteMediaIP	IP address	@{RemoteMediaIP}	RemoteIP used for the media. This is only for VOIP.
13	Telcob-RemoteMediaPort	Integer	@{RemoteMediaPort}	RTP Port of the remote peer. This is only for VOIP.
14	Telcob-TrunkName	String	@{TrunkName}	Name of the trunk (ex. "LS004400E1_0_00"). This attribute is only for non-VOIP.
15	Telcob-TimeslotNumber	Integer	@{TimeslotNumber}	This is the Timeslot Number. This attribute is only for non-VOIP.
16	Telcob-MediaInfo	String	@{RemoteMediaInfo}	Deprecated: use Telcob-RemoteMediaInfo
17	Telcob-StartTime	String	@{StartTime}	String that represents the StartTime of the call.
18	Telcob-ConnectedTime	String	@{ConnectedTime}	String that represents the time when the call was connected
19	Telcob-EndTime	String	@{EndTime}	String that represents when the call was completed.
20	Telcob-TerminationCause	Integer	@{TerminationCause}	Integer that represents the Termination Cause
21	Telcob-Other-Leg-Id	Integer	@{OtherLegId}	Integer that represents the other LegID bridged for this call
22	Telcob-TerminationCauseString	String	@{TerminationCauseString}	String that represents the TerminationCause, but in a String format.
23	Telcob-TerminationSource	String	@{TerminationSource}	String that represents the Termination Source
24	Telcob-LocalSipIP*	IPAddr	@{LocalSipIP}	IP Address that represents the Local IP used for SIP.
25	Telcob-LocalSipPort*	Integer	@{LocalSipPort}	Integer that represents the Local port used for SIP.
26	Telcob-LocalMediaIP	IPAddr	@{LocalMediaIP}	IP Address that represents the Local IP used for the media.
27	Telcob-LocalMediaPort	Integer	@{LocalMediaPort}	Integer that represents the Local port used for the media.
28	Telcob-LocalMediaInfo	String	@{LocalMediaInfo}	String that represents the Local Media Info.(ex. VOIP: "PCMU@10.3.10.124:20054" TDM: LS_T1_TRK_00:1)
29	Telcob-RemoteMediaInfo	String	@{RemoteMediaInfo}	String that represents the Remote Media Info.(ex. VOIP: "PCMU@10.3.10.124:20054" TDM: LS_T1_TRK_00:1)
30	Telcob-Alert-Time	String	@{AlertTime}	Time where the call has started ringing.
31	Telcob-Redirecting-Number	String	@{RedirectingNumber}	Redirecting number
32	Telcob-Original-Called-Number	String	@{OriginalCalledNumber}	Original called number
33	Telcob-Calling-Presentation	String	@{CallingPresentation}	Calling presentation: "Unspecified", "NotAvailable", "Allowed", "Restricted", "AddressRestricted" or "NameRestricted"
34	Telcob-CallingSubscriberNumber	String	@{CallingSubscriberNumber}	Second calling number (ISDN) or Generic number of type additional calling party number (SS7)
35	Telcob-OriginalCause	String	@{OriginalCause}	String that represents the Original Termination Cause in a String format.
36	Telcob-CustomCdrValue	String	In routing script: params[:bridge][:CustomCdrValue] or routes[0..X][:CustomCdrValue]	String that needs to appear in CDR. If you want to have the same string in all legs, set params[:bridge][:CustomCdrValue] to the value required. If you want to have a custom string for each route, set routes[0..X][:CustomCdrValue]
37	Telcob-CollectedDigits	string	@{CollectedDigits}
38	Telcob-MosIngress	string	@{Stat:MOS:Ingress}	Calculated MOS value using RTP RX statistics
39	Telcob-MosEgress	string	@{Stat:MOS:Egress}	Calculated MOS value using RTCP statistics (available only when RTCP is enable)
100	Telcob-RtpRxPackets	Integer	@{Stat:Rtp:Rx:Packets}	Number of packets received from the IP network (audio + comfort noise + signaling)
101	Telcob-RtpRxVoiceBytes	Integer	@{Stat:Rtp:Rx:Packets}	Number of payload bytes from voice (audio) packets received from the IP network
102	Telcob-RtpRxVoiceDuration	Integer	@{Stat:Rtp:Rx:VoiceDuration}	Duration (in seconds) of voice (audio), from IP to TDM direction
103	Telcob-RtpRxMaxPlayoutDelay	Integer	@{Stat:Rtp:Rx:VoiceDuration}	Maximum (for the whole call) IP to TDM audio delay in millisecond (adaptive jitter buffer delay)
120	Telcob-RtpRxErrors	Integer	@{Stat:Rtp:Rx:Errors}	Total of all detected errors in the 'Rx' direction
121	Telcob-RtpRxLostPackets	Integer	@{Stat:Rtp:Rx:Error:LostPackets}	Number of packets lost (never received for play-out to TDM)
130	Telcob-RtpTxPackets	Integer	@{Stat:Rtp:Tx:Packets}	Number of packets sent to the IP network (audio + comfort noise + signaling)
132	Telcob-RtpTxVoiceDuration	Integer	@{Stat:Rtp:Tx:VoiceDuration}	Duration (in seconds) of voice (audio), from TDM to IP direction
150	Telcob-RtpTxErrors	Integer	@{Stat:Rtp:Tx:Errors}	Total of all detected errors in the 'Tx' direction
151	Telcob-RtpTxLostPackets	Integer	@{Stat:Rtp:Tx:Error:LostPackets}	Number of packets considered "lost" by remote side (only available if RTCP is used)
152	Telcob-RtpTxArpFailure	Integer	@{Stat:Rtp:Tx:Error:ArpFailure}	Number of failures to ARP remote IP address to send RTP packets to (preventing sending any packets)
160	Telcob-RtcpJitter	Integer	@{Stat:Rtcp:Jitter}	Inter-packet interval jitter, in millisecond

* = Not implemented.

The column Text CDR Variable provide the reference to the corresponding variable in the text CDRs. See the Text-based call detail records.

Radius Accounting dictionary

• The Radius accounting dictionary is located on the TMG unit's filesystem at this location:

 /lib/tb/toolpack/pkg/[version]/web/radius_dictionary

For example:

 /lib/tb/toolpack/pkg/3.0.40/web/radius_dictionary

If you do not have access, please contact TelcoBridges support to get a copy.

Radius AAA sample

• TelcoBridges_RADIUS_Auth&Acct.pcap
• TelcoBridges_RADIUS_Auth&Acct.txt