SCCP:Error Performance Report
The performance report error (event) notification message is received by the host application when a SCCP is reporting a performance error.
General explanation of the field of event notification error performance report:
- The SCCP handle field specifies the handle of the SCCP instance.
- The Cause field specifies the cause of the error performance report.
| Cause | Report parameters used | Description |
|---|---|---|
| Protocol bind-fail | Unknown | Bind with service provider failed |
| Protocol bind-fail | Unknown | Bind with service provider failed |
| Protocol bind-fail | Unknown | Bind with service provider failed |
| Protocol bind-fail | Unknown | Bind with service provider failed |
| Protocol bind-fail | Unknown | Bind with service provider failed |
Table SEQ Table \* ARABIC 96 - SCCP cause under error performance report
Cause
TB640_SS7_SCCP_REPORT_ERR_PERF_CAUSE_...
Used Report parameters
Description
UNKNOW
None
Unknown.
RTF_NTBADADDR
- un32NetworkId
- ProtocolVariant
- Called Address
- Calling Address
Routing failure - No translation for address of such nature.
RTF_NTSPECADDR
- un32NetworkId
- ProtocolVariant
- Called Address
- Calling Address
Routing failure - No translation for this specific address.
RTF_NETWORK_FAIL
- un32NetworkId
- ProtocolVariant
- Calling Address
Routing failure - Network failure (point code not available).
RTF_NETWORK_CONGESTION
- un32NetworkId
- ProtocolVariant
- Dpc
- Calling Address
Routing failure - Network congestion.
RTF_SUBSYSTEM_FAILURE
- un32NetworkId
- ProtocolVariant
Routing failure - Subsystem failure (unavailable).
RTF_SUBSYSTEM_CONGESTION
- un32NetworkId
- ProtocolVariant
- Calling Address
Routing failure - Subsystem congestion.
RTF_UNEQUIPPED
- un32NetworkId
- ProtocolVariant
Routing failure - Unequipped user (subsystem).
REASSEMBLY_OUTSEQ
- un32NetworkId
- ProtocolVariant
- Calling Address
- un32CongestionLvl
Reassembly error - Segment received out of sequence.
HOP_VIOLATION
- un32NetworkId
- ProtocolVariant
- Called Address
- Calling Address
Hop counter violation ( XUDT(S) / LUDT(S) ).
SEGFAIL_TOO_LARGE
- un32NetworkId
- ProtocolVariant
Message too large for segmentation.
SSC_RECV
- un32NetworkId
- ProtocolVariant
- Dpc
- un32CongestionLvl
SCCP / Subsystem congested message received.
SSP_RECV
- un32NetworkId
- ProtocolVariant
- Dpc
- un32SSN
Subsystem prohibited message received.
Description of parameters
General explanation of the Report-specific information parameters:
- The network identifier parameter (un32NetworkId) specifies the ID of the network.
- The called address parameter (CalledAddress) specifies the called party address. See Entity explanation in section 7.2.1.7 08D0C9EA79F9BACE118C8200AA004BA90B02000000080000000E0000005F005200650066003100320035003500320030003100310033000000 GTT Address Map Configuration 08D0C9EA79F9BACE118C8200AA004BA90B02000000080000000E0000005F005200650066003100320035003500320030003100310033000000 .
- The calling address parameter (CallingAddress) specifies the calling party address. See Entity explanation in section 7.2.1.7 08D0C9EA79F9BACE118C8200AA004BA90B02000000080000000E0000005F005200650066003100320035003500320030003100310033000000 GTT Address Map Configuration 08D0C9EA79F9BACE118C8200AA004BA90B02000000080000000E0000005F005200650066003100320035003500320030003100310033000000 .
- The destination point code parameter (Dpc) specifies the point code of the node where the route is terminating.
- The protocol variant parameter (ProtocolVariant) specifies the SCCP protocol variant. See Table 73 - SCCP protocol variant 08D0C9EA79F9BACE118C8200AA004BA90B02000000080000000E0000005F005200650066003100320034003200310034003700330039000000 .
- The subsystem number parameter (un32SSN) specifies a subsystem number. See Table 79 - SCCP SSN value to identify SCCP user 08D0C9EA79F9BACE118C8200AA004BA90B02000000080000000E0000005F005200650066003100320034003200340032003200330036000000 .
- The segmentation reference parameter (un32SegmentationRef) specifies the SCCP segmentation local reference number.
- The congestion level parameter (un32CongestionLvl) specifies the remote SCCP congestion level (reception of SSC). Value is in range 0 to 7.
