Creating a SIP Registrar

From TBwiki
Revision as of 08:55, 7 June 2019 by Cbilodeau (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Applies to version(s): v3.0

A SIP registrar represents a SIP endpoint that provide a location service. You must configure SIP Registrar for your system. The first step in doing so is to select your SIP Domain:


1- Click on your domain in the SIP Domain List

Select SIP Domain.png


2- Click Create New SIP Registration Registrar

Create New SIP Registrar.png


3- Create the new SIP Registration Registrar

  • Enter a Name for the SIP Registration Registrar
  • Enter an Address to reach the registrar
  • Select the registrar destination Port
  • Select which local interface will be use to send REGISTER message in SIP Transport Server
  • Poll Registrar enabled by default. Sends an OPTIONS message to determine registrar availability.
  • Polling Interval in seconds. Time between each OPTIONS sending message.
  • Response Timeout in second. Maximum waiting time for a response to a registrar polling.
  • Click Create

Create New SIP Registrar3.png


4- Verify that the Sip registration registrar was successfully created message appears

Create New SIP Registrar2.png

Retrieved from "https://docs.telcobridges.com/mediawiki/index.php?title=Toolpack:Creating_a_SIP_Registrar_SBC_A&oldid=27400"
Personal tools