Configuring SIP Registration for Open NAP

From TBwiki
Revision as of 04:15, 19 November 2019 by William Wong (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Applies to version(s): v3.0

An Open NAP is a NAP that facing internet and covering all IP end points that can access the ProSBC. Registration from outside internet via Open NAP will be pass through ProSBC to the SIP Registrar. You must configure SIP Registration Domain(s) for your Open NAP and associate them to the Open NAP. Configuring SIP Registration for Open NAP in ProSBC requires no extra step from using steps in configuring an Open NAP.

To create a new NAP:

1- Click NAPs in the navigation panel

NAP NavigationMenu.png


2- Click Create New NAP

Create New NAP SIP.png


3- Create the new NAP:

  • Enter a name for the NAP
  • Click Create

Open NAP Create.png

4- Verify that the NAP was successfully created message appears

Create New NAP SIP2.png

5- Associate a SIP transport server with the new NAP:

  • Select a SIP Transport Server from the Available list
  • Click "<<" to associate the WAN_SIP_TS with the NAP

Open NAP Create 1.png

6- Disable proxy address:

Open NAP Create NoProxy.png


7- Enter full access in the access control list

  • Enter an IP/MASK (use 0.0.0.0/0 to accept any addresses)
  • Click "<<" to add in the list of Access Control

Open NAP Create ACL.png

8- Associate a Port range with the new NAP:

  • Select a port range from the Available list
  • Click "<<" to associate WAN_Vlan:0 Port range with the NAP

Open NAP Create 2.png

9- Associate a SIP Domain with the new NAP. If you have more than 1 domain you need to associate all of them with OPEN NAP/SIP NAP:

  • Select a sip domain from the Available list
  • Click "<<" to associate the SIP Domain with the NAP

Open NAP Create 3.png


10- Configure settings for the following parameter groups as required:

  • Check Accept only authorized users option. With this option unchecked, FreeSBC will forward any INVITEs sent to the "Open NAP" to the PBX without first authenticating the user.
  • Registration Parameters
  • Authentication Parameters
  • Network Address Translation
  • SIP-I Parameters
  • Advanced Parameters
  • Click Save

Open NAP Create 4 2.png

Retrieved from "https://docs.telcobridges.com/mediawiki/index.php?title=Configuring_SIP_Registration_for_Open_NAP&oldid=27865"
Personal tools