Creating an M3UA Configuration (ASP)
From TBwiki
Applies to version(s): 2.9, 2.10, 3.0, 3.2
To set up your M3UA system as a Application Server Process (ASP), you must first create a new M3UA configuration.
In this configuration the the SIGTRAN M3UA is an extension of the MTP3 layer. This system is typically set up between Application Server Process (ASP) and Signaling Gateway Process (SGP).
To create an M3UA ASP configuration:
1- Click M3UA in the navigation panel:
2- Configure the M3UA service for ASP:
- Enter a name for the configuration
- Select Application Server Process (ASP) as the node type
- Click Create
3- Verify that the "M3ua Cfg was successfully created" message appears
Path
/configurations/@[configuration_name]/m3ua_stacks/@[m3ua_name]
Parameters (text)
/configurations/@[configuration_name]/m3ua_stacks/@[m3ua_name] enabled = false name = "@[m3ua_name]" node_type = "Application Server Process (ASP)" /configurations/@[configuration_name]/m3ua_stacks/@[m3ua_name]/advanced_parameters as_pending_timer = "5 seconds" asp_down_timer = "2 seconds" asp_msg_timer = "2 seconds" asp_up_timer = "2 seconds" cong_level_1 = 500 cong_level_2 = 600 cong_level_3 = 750 daud_timer = "2 seconds" destination_restrict_supported = false drkm_nb_msg = 3 drkm_timer = "2 seconds" duna_settle_timer = "1 second" heartbeat_timer = "" mtp3_status_timer = "5 seconds" only_one_hardware_unit_active = false restart_timer = "10 seconds" seq_control_timer = "1 second"
Parameters (json)
{
"advanced_parameters" : {
"as_pending_timer" : "5 seconds",
"asp_down_timer" : "2 seconds",
"asp_msg_timer" : "2 seconds",
"asp_up_timer" : "2 seconds",
"cong_level_1" : 500,
"cong_level_2" : 600,
"cong_level_3" : 750,
"daud_timer" : "2 seconds",
"destination_restrict_supported" : false,
"drkm_nb_msg" : 3,
"drkm_timer" : "2 seconds",
"duna_settle_timer" : "1 second",
"heartbeat_timer" : "",
"mtp3_status_timer" : "5 seconds",
"only_one_hardware_unit_active" : false,
"restart_timer" : "10 seconds",
"seq_control_timer" : "1 second"
},
"enabled" : false,
"name" : "@[m3ua_name]",
"node_type" : "Application Server Process (ASP)"
}
List of Parameters
