Creating a System Clock

Applies to version(s): 2.9, 2.10, 3.0, 3.2

An external clock ensures that the system time is synchronized.

To create an external system clock reference:

1- Select Clocking from the navigation panel

2- Click Create New External System Clock Reference.

3- Enter values for the clock.

• Enter a name for the new clock.
• Select an available Unit.
• Select a Clock Ref Type .
• Select a Clock Ref Source.
• Click Create.

4- The new clock is displayed in the External System Clock Reference List.

Note Use TMS Link Switch Over Recovery is only used for the TMG7800

List of Parameters

• Name
• Unit
• Clock Ref Type
• Clock Ref Type

• Use Clock Ref Recovery
• Use TMS Link Switch Over Recovery

Advanced Parameters

• Qualify Delay
• Qualify Recovery Delay
• Trunk LOS defects (unqualify mark)
• Trunk LOS defects (qualify mark)
• Trunk OOF defects (unqualify mark)
• Trunk OOF defects (qualify mark)
• Trunk FEC anomalies (unqualify mark)
• Trunk FEC anomalies (qualify mark)
• Trunk CVC anomalies (unqualify mark)
• Trunk CVC anomalies (qualify mark)