Creating the M2PA Configuration

Applies to version(s): 2.9, 2.10, 3.0, 3.2

This article applies to:	Product	Version
	Tmedia	2.9, 2.10, 3.0, 3.2

To create an M2PA configuration:

1- Select M2PA from the navigation panel

2- Configure the M2PA service

• Make sure the box labelled Enabled is checked
• Enter a name for the M2PA service
• Click Create

3- Verify that the "M2ua Cfg was successfully created" message appears

Path

/configurations/@[configuration_name]/hardware_units/@[hardware_name]/m2pa_stacks/@[m2pa_name]

Parameters (text)

/configurations/@[configuration_name]/hardware_units/@[hardware_name]/m2pa_stacks/@[m2pa_name]
enabled         = true
name            = "@[m2pa_name]"
sctp_poll_timer = "1 second"

Parameters (json)

{
  "enabled" : true,
  "name" : "@[m2pa_name]",
  "sctp_poll_timer" : "1 second",
  "m2pa_saps" : {
  }
}

List of Parameter

• Name