Creating an M3UA Peer Server

This article applies to:	Product	Version
	Tmedia	2.9, 2.10, 3.0, 3.2

After you create an M3UA peer signaling process (PSP), you must create a new peer server. A peer server is a logical entity on the IP network that is served by one or more PSPs.

To create an M3UA peer server:

1- Click M3UA in the navigation panel:

2- Select an M3ua Network:

3- Click Create New M3ua Peer Server in the M3UA network configuration window

4- Configure the new M3UA peer server:

• Enter a name for the peer server
• Create a remote Peer Server (PSRV) with a Routing Context (RC) value representing the remote side； Take the RC value from ASP configuration.

 Note:
1) For SG/ASP, it is mandatory that this value is the same as the ASP local PSRV RC value.
2) SG only uses remote peer servers, so a local peer server (OPC) is NOT needed.

• Select the Traffic Mode Type. For remote peer server, this field is used in ASPAC.
• Click Create

5- Verify that the "M3ua Peer server was successfully created" message appears

6- Associate the newly created peer server with a peer signaling process (PSP):

• Select a PSP from the list of available PSPs
• Click the "<<" button to associate the PSP with the peer server

Path

/configurations/@[configuration_name]/m3ua_stacks/@[m3ua_name]/m3ua_networks/@[m3ua_network]/m3ua_psrvs/@[m3ua_peer_server]

Parameters (text)

/configurations/@[configuration_name]/m3ua_stacks/@[m3ua_name]/m3ua_networks/@[m3ua_network]/m3ua_psrvs/@[m3ua_peer_server]
local               = false
m3ua_psps           = [ "m3ua_psp" ]
name                = "m3ua_peerServer"
routing_ctx         = 0
traffic_mode        = "Active-Standby"

/configurations/@[configuration_name]/m3ua_stacks/M3UA/@[m3ua_name]_networks/@[m3ua_network]/m3ua_psrvs/@[m3ua_peer_server]/advanced_parameters
load_sharing_mode                    = "SLS"
minimum_active_psps_for_load_sharing = 1
req_available                        = false

Parameters (json)

{
  "advanced_parameters" : {
    "load_sharing_mode" : "SLS",
    "minimum_active_psps_for_load_sharing" : 1,
    "req_available" : false
  },
  "local" : false,
  "m3ua_psps" : [
    "m3ua_psp"
  ],
  "name" : "@[m3ua_peer_server]",
  "routing_ctx" : 0,
  "traffic_mode" : "Active-Standby"
}

List of Parameters

• Name
• Local
• Routing Context
• Traffic Mode Type