Creating an IUA Cluster

From TBwiki
Revision as of 13:53, 9 December 2020 by Allyntree (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
This article applies to: Product Version
Tmedia 2.9, 2.10, 3.0, 3.2

After you create an IUA SAP, you must create an IUA cluster for your system.

To create an IUA cluster:

1- Click IUA in the navigation panel

Create Iua Config 0.png


2- Select an IUA SAP

Select IUA SAP 0.png


3- Click Create New Iua Cluster in the IUA SAP configuration window

Create Iua cluster 0.png


4- Configure the new IUA cluster:

  • Enter a name for the cluster
  • Select a traffic mode
  • Select a load share mode
  • Click Create

Create Iua cluster 1.png


5- Verify that the "Iua Cluster was successfully created" message appears

Create Iua cluster 2.png


Path

/configurations/@[configuration_name]/hardware_units/@[hardware_name]/iua_stacks/@[iua_stack]/iua_saps/@[iua_sap]/iua_clusters/@[iua_cluster]

Parameters (text)

/configurations/@[configuration_name]/hardware_units/@[hardware_name]/iua_stacks/@[iua_stack]/iua_saps/@[iua_sap]/iua_clusters/@[iua_cluster]
loadshare_mode      = "PER_LINK"
name                = "@[iua_cluster]"
traffic_mode        = "ACTIVE_STANDBY"

/configurations/Allyn_Config2/hardware_units/TB014369/iua_stacks/Iua0/iua_saps/IuaSap/iua_clusters/IuaCluster/advanced_parameters
min_simultaneous_active_peer = 1
msg_queue_size               = 16

Parameters (json)

{
  "advanced_parameters" : {
    "min_simultaneous_active_peer" : 1,
    "msg_queue_size" : 16
  },
  "loadshare_mode" : "PER_LINK",
  "name" : "@[iua_cluster]",
  "traffic_mode" : "ACTIVE_STANDBY"
}


List of Parameters

Personal tools