Toolpack:Configuring IP Interfaces v2.3

The IP interface of the VoIP0 and VoIP1 ports can be configured by setting the following:

• IP Address
• Netmask
• Gateway

To configure a VoIP0 or VoIP1 port

1. Select IP Interfaces from the navigation panel.

2. Click 'Edit' from the IP Interfaces Information panel.

3. Enter an IP address, a Netmask, and a gateway address.

• Click Save" to save the changes.

4. The changes are displayed in the IP interfaces information panel.

Note: To apply the IP configuration change, activate the current configuration, and then reboot the adapter.