Configuring Toolpack:SIP to ISDN Gateway

Introduction

This guide is intended to help Toolpack user to configure a SIP to ISDN Gateway.

This guide assumes the following:

• Toolpack version is v2.4.
  
• Toolpack is already installed and running on the host.
  
• Routing: All incoming SIP calls are bridged to ISDN and all incoming ISDN calls are bridged to SIP.

Before starting

Here is a list of mandatory information that the user must know before configuring Toolpack:

SIP

• SIP IP address(es) (IP address of your system where the SIP signaling will be incoming)
  
• SIP provider(s)/consumers IP address(es) (remote IP address)
  
• SIP port (default:5060)
  
• SIP port type: UDP or TCP (default: UDP)

ISDN

• ISDN stack variant(s)
  
• Network side: User or network