Web Portal:Configuration Copy

This page describes the steps required to copy a configuration with the web portal

Note: This page assumes that you are using the gateway application. If you are using your own application, you will be required to do the same step but for your plug in.

Copy Configuration

• Go in the Configuration menu.
• Click the Copy link of the configuration you wish to copy.
• Write the name of your new configuration.
• Click the Copy button.
• After it is copied click on the Configure Now link of your new configuration.

Create a new Gateway/Plug in application configuration

• Go in the Gateway->Configurations menu.
• Click the Create New Configuration link.
• Fill the form, the Configuration should be set to the name of your new Configuration.
• Click the Create button.

Create a new Gateway/Plug in application instance

• Go in the Config->Applications->Instances menu.
• Click the Create New Application Instance link.
• Fill the form, the Application Config should be set to the name of your new Gateway/Plug in application configuration.
• Click the Create button.