Creating M2UA Links

From TBwiki
Jump to: navigation, search

Applies to version(s): v2.8

AFter you create an M2UA cluster, you must create M2UA links for your system.

An M2UA link is always bound to an MTP2 link, and can be seen a way of extending MTP2 functionality.

To create an M2UA link:

1- Click M2UA in the navigation panel

Create M2ua 0.png


2- Select an M2UA SAP

Select M2uaSap 0.png


3- Select an M2UA Cluster

Select M2uaCluster 0.png


4- Click Create New M2ua Link in the M2UA cluster configuration window:

Create M2UA Link 0.png


5- Configure the new M2UA link:

  • Enter a name for the link
  • IMPORTANT!
    • For a system on a signaling gateway: Select an MTP2 link
    • For a system on a media gateway controller: Select NONE
  • Select a protocol type (same as MTP2)
  • Select an interface ID type
  • Enter an appropriate interface ID (must be unique to each link)
  • Click Create

Create M2UA Link 1.png


6- Verify that the "M2ua Link was successfully created" message appears

Create M2UA Link 2.png


List of Parameters

Retrieved from "https://docs.telcobridges.com/mediawiki/index.php?title=Toolpack:Creating_M2UA_Links_B&oldid=16644"
Personal tools