Creating an M3UA Route

From TBwiki

Now that you have configured M3UA user parts, PSPs, and peer servers, you must create M3UA routes for your system.

You require 1 route per point codes in your system. This means 1 route per DPC (SSP and STP) and 1 per source point code (OPC).

To create an M3UA route on an IPSP:

1- Click M3UA in the navigation panel:

2- Select an M3ua Network:

3- Click Create New M3ua Route in the M3UA network configuration window

2- Configure the new M3UA route:

For OPC: This route is used for local point code and to reach the ASP.

Enter a name for the route
Select a route type:Psrv
Select an M3UA peer server: Select the previously configured M3US Peer Server with the right RC
Select an M3UA user part:NONE
Select a point code: Select the OPC from the MTP3 linkset
Select a point code mask (Recommended value: Exact match)
Select a sub-service field type:ISUP or SCCP
Click Create

For DPC: This route is used to reach the DPC used in MTP3 configuration.

3- Verify that the "M3ua Route was successfully created" message appears

List of Parameters