Toolpack:RADIUS CDR attributes

From TBwiki
Jump to: navigation, search

Applies to version(s): v3.0, v3.1

This page contains the list of RADIUS attributes that are sent to a RADIUS accounting server.


From RFC 2865 and RFC 2866 (Accounting) :

Attribute ID RADIUS IETF param name Type Text CDR variable Description
1
 User-Name string
 @{IncomingNAP} Incoming NAP name
2
 User-Password string
3
 CHAP-Password string
4
 NAS-IP-Address ipaddr
 IP address of the TMedia generating the CDR record
3
 CHAP-Password string
5
 NAS-Port integer
6
 Service-Type integer
7
 Framed-Protocol integer
8
 Framed-IP-Address string
9
 Framed-IP-Netmask string
10
 Framed-Routing integer
11
 Filter-Id string
12
 Framed-MTU integer
13
 Framed-Compression integer
14
 Login-IP-Host ipaddr
15
 Login-Service integer
16
 Login-TCP-Port integer
18
 Reply-Message string
19
 Callback-Number string
20
 Callback-Id string
22
 Framed-Route string
23
 Framed-IPX-Network ipaddr
24
 State string
25
 Class string
26
 Vendor-Specific string
27
 Session-Timeout integer
28
 Idle-Timeout integer
29
 Termination-Action integer
30
 Called-Station-Id string
 @{CalledNumber} Called party number
31
 Calling-Station-Id string
 @{CallingNumber} Calling party number
32
 NAS-Identifier string
 @{CallingNumber} Application name of the CDR provider
33
 Proxy-State string
34
 Login-LAT-Service string
35
 Login-LAT-Node string
36
 Login-LAT-Group string
37
 Framed-AppleTalk-Link integer
38
 Framed-AppleTalk-Network integer
39
 Framed-AppleTalk-Zone string
40
 Acct-Status-Type integer
 @{StatusType} Start or Stop
41
 Acct-Delay-Time integer
42
 Acct-Input-Octets integer
43
 Acct-Output-Octets integer
44
 Acct-Session-Id string
 @{LegId} Call Leg Identifier
45
 Acct-Authentic integer
46
 Acct-Session-Time integer
 @{CallDuration} Duration of the call, in seconds. Corresponds to h323-disconnect-time minus h323-connect-time.
47
 Acct-Input-Packets integer
48
 Acct-Output-Packets integer
49
 Acct-Terminate-Cause integer
50
 Acct-Multi-Session-Id string
51
 Acct-Link-Count integer


Attribute ID 26, Vendor ID: 9 (Cisco)

Vendor specific attribute ID RADIUS IETF param name Type Text CDR variable Description
1
 Cisco-AVPair string
2
 Cisco-NAS-Port string
 @{NAP} Network Access Point name for the call leg
3
 Cisco-Fax-Account-Id-Origin string
4
 Cisco-Fax-Msg-Id string
5
 Cisco-Fax-Pages string
6
 Cisco-Fax-Coverpage-Flag string
7
 Cisco-Fax-Modem-Time string
8
 Cisco-Fax-Connect-Speed string
9
 Cisco-Fax-Recipient-Count string
10
 Cisco-Fax-Process-Abort-Flag string
11
 Cisco-Fax-Dsn-Address string
12
 Cisco-Fax-Dsn-Flag string
13
 Cisco-Fax-Mdn-Address string
14
 Cisco-Fax-Mdn-Flag string
15
 Cisco-Fax-Auth-Status string
16
 Cisco-Email-Server-Address string
17
 Cisco-Email-Server-Ack-Flag string
18
 Cisco-Gateway-Id string
19
 Cisco-Call-Type string
20
 Cisco-Port-Used string
21
 Cisco-Abort-Cause string
23
 h323-remote-address string
24
 h323-conf-id string
 @{SessionId} Unique call identifier for the two initial legs (incoming and outgoing) - 128 bits integer formated as xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx.
Note: Starting with Toolpack 2.9, this id is now globally unique (unique across different TMedia systems).
25
 h323-setup-time string
 @{StartTime} Represent the call leg setup time - Coordinated Universal Time (UTC)
26
 h323-call-origin string
 @{OriginatorName} "originate" for an outgoing leg - "answer" for an incoming leg
27
 h323-call-type string
 @{CallType} If protocol is SIP the value is "VOIP", otherwise it is "Telephony"
28
 h323-connect-time string
 @{ConnectedTime} Represent the call leg answer time (connect time) - Coordinated Universal Time (UTC)
29
 h323-disconnect-time string
 @{EndTime} Represent the call leg disconnect time - Coordinated Universal Time (UTC)
30
 h323-disconnect-cause string
 @{TerminationCause} Q.931 disconnect (1 to 160) cause, TB Toolpack system cause (200 to 300) and SIP cause (400 to 600)
31
 h323-voice-quality string
33
 h323-gw-id string
35
 h323-incoming-conf-id string
 @{OriginalSessionId} Contains the original h323-conf-id in case of call transfer for subsequent outgoing legs - 128 bits integer formated as xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx.
Note: Starting with Toolpack 2.9, this id is now globally unique (unique across different TMedia systems).
101
 h323-credit-amount string
102
 h323-credit-time string
103
 h323-return-code string
104
 h323-prompt-id string
105
 h323-time-and-day string
106
 h323-redirect-number string
107
 h323-preferred-lang string
108
 h323-redirect-ip-address string
109
 h323-billing-model string
110
 h323-currency string
111
 subscriber string
112
 gw-rxd-cdn string
113
 gw-final-xlated-cdn string
114
 remote-media-address string
115 release-source string
 @{TerminationSource} "localLeg" if this leg terminate the call or "connectedLeg" if its the connected leg - We use a Cisco string field with our own value definition
116
 gw-rxd-cgn string
117
 gw-final-xlated-cgn string
141
 call-id String
 @{SipCallId} Content of the "call-id" SIP header
142
 session-protocol string
143
 method string
144
 prev-hop-via string
145
 prev-hop-ip string
146
 incoming-req-uri string
147
 outgoing-req-uri string
148
 next-hop-ip string
149
 next-hop-dn string
150
 sip-hdr string
187
 Cisco-Multilink-ID integer
188
 Cisco-Num-In-Multilink integer
190
 Cisco-Pre-Input-Octets integer
191
 Cisco-Pre-Output-Octets integer
192
 Cisco-Pre-Input-Packets integer
193
 Cisco-Pre-Output-Packets integer
194
 Cisco-Maximum-Time integer
195
 Cisco-Disconnect-Cause integer
197
 Cisco-Data-Rate integer
198
 CCisco-PreSession-Time integer
208
 Cisco-PW-Lifetime integer
209
 Cisco-IP-Direct integer
210
 Cisco-PPP-VJ-Slot-Comp integer
212
 Cisco-PPP-Async-Map integer
217
 Cisco-IP-Pool-Definition string
218
 Cisco-Assign-IP-Pool integer
228
 Cisco-Route-IP integer
233
 Cisco-Link-Compression integer
234
 Cisco-Target-Util integer
235
 Cisco-Maximum-Channels integer
242
 Cisco-Data-Filter integer
243
 Cisco-Call-Filter integer
244
 Cisco-Idle-Limit integer
250
 Cisco-Account-Info string
251
 Cisco-Service-Info string
252
 Cisco-Command-Code string
253
 Cisco-Control-Info string
255
 Cisco-Xmit-Rate integer


Attribute ID 26, Vendor ID: 21776 (TelcoBridges)

Vendor specific attribute ID RADIUS IETF param name Type Text CDR variable Description
1
 Telcob-Timestamp string
 @{Timestamp} Time when this CDR log entry was created. Should not be used for billing purposes. Use @{EndTime} for billing @{EndTime} reports the time where the call has started terminating (hangup), while @{Timestamp} the time where signaling confirmed the termination.
2
 Telcob-LegId integer
 @{LegId} Unique Id for this leg (32 bits value).
3
 Telcob-LinkId integer
 @{LinkId} Same meaning as @{OriginalSessionId}, but presented as a 32 bits integer value.
4
 Telcob-ApplicationName string
 @{ApplicationName} Name of the application that has written this log ("Gateway")
5
 Telcob-NAP string
 @{NAP} Name of the NAP this call leg is from
6
 Telcob-CallingNumber string
 @{CallingNumber} Calling number
7
 Telcob-CalledNumber string
 @{CalledNumber} Called number
8
 Telcob-OrginatorName string
 @{OriginatorName} Direction of the call: "answer" (incoming call leg), "originate" (outgoing call leg)
9
 Telcob-ChargeIndicator String
 @{ChargeIndicator} For TDM (SS7 and CAS R2); received charge indicator in Alert message.
10
 Telcob-Protocol String
 @{Protocol} Protocol used for this LegID. Ex. SIP, ISDN, etc.
11
 Telcob-Codec String
 @{Codec} Codec used for this LegID
12
 Telcob-RemoteMediaIP ipaddr
 @{RemoteMediaIP} RemoteIP used for the media. This is only for VOIP.
13
 Telcob-RemoteMediaPort Integer
 @{RemoteMediaPort} RTP Port of the remote peer. This is only for VOIP.
14
 Telcob-TrunkName String
 @{TrunkName} Name of the trunk (ex. "LS004400E1_0_00").

This attribute is only for non-VOIP.

15
 Telcob-TimeslotNumber Integer
 @{TimeslotNumber} This is the Timeslot Number.

This attribute is only for non-VOIP.

16
 Telcob-MediaInfo String
 @{RemoteMediaInfo} Deprecated: use Telcob-RemoteMediaInfo
17
 Telcob-StartTime String
 @{StartTime} String that represents the StartTime of the call.
18
 Telcob-ConnectedTime String
 @{ConnectedTime} String that represents the time when the call was connected
19
 Telcob-EndTime String
 @{EndTime} String that represents when the call was completed.
20
 Telcob-TerminationCause Integer
 @{TerminationCause} Integer that represents the Termination Cause
21
 Telcob-Other-Leg-Id Integer
 @{OtherLegId} Integer that represents the other LegID bridged for this call
22
 Telcob-TerminationCauseString String
 @{TerminationCauseString} String that represents the TerminationCause, but in a String format.
23
 Telcob-TerminationSource String
 @{TerminationSource} String that represents the Termination Source
24
 Telcob-LocalSipIP* ipaddr
 @{LocalSipIP} IP Address that represents the Local IP used for SIP.
25
 Telcob-LocalSipPort* Integer
 @{LocalSipPort} Integer that represents the Local port used for SIP.
26
 Telcob-LocalMediaIP ipaddr
 @{LocalMediaIP} IP Address that represents the Local IP used for the media.
27
 Telcob-LocalMediaPort Integer
 @{LocalMediaPort} Integer that represents the Local port used for the media.
28
 Telcob-LocalMediaInfo String
 @{LocalMediaInfo} String that represents the Local Media Info.(ex. VOIP: "PCMU@10.3.10.124:20054" TDM: LS_T1_TRK_00:1)
29
 Telcob-RemoteMediaInfo String
 @{RemoteMediaInfo} String that represents the Remote Media Info.(ex. VOIP: "PCMU@10.3.10.124:20054" TDM: LS_T1_TRK_00:1)
30
 Telcob-Alert-Time String
 @{AlertTime} Time where the call has started ringing.
31
 Telcob-Redirecting-Number String
 @{RedirectingNumber} Redirecting number
32
 Telcob-Original-Called-Number String
 @{OriginalCalledNumber} Original called number
33
 Telcob-Calling-Presentation String
 @{CallingPresentation} Calling presentation: "Unspecified", "NotAvailable", "Allowed", "Restricted", "AddressRestricted" or "NameRestricted"
34
 Telcob-CallingSubscriberNumber String
 @{CallingSubscriberNumber} Second calling number (ISDN), Generic number of type additional calling party number (SS7) and SIP P-asserted-identity, userinfo
35
 Telcob-OriginalCause String
 @{OriginalCause} String that represents the Original Termination Cause in a String format.
36
 Telcob-CustomCdrValue String
 In routing script: params[:bridge][:CustomCdrValue] or routes[0..X][:CustomCdrValue] String that needs to appear in CDR. If you want to have the same string in all legs, set params[:bridge][:CustomCdrValue] to the value required. If you want to have a custom string for each route, set routes[0..X][:CustomCdrValue]
37
 Telcob-CollectedDigits string
 @{CollectedDigits}
38
 Telcob-MosIngress string
 @{Stat:MOS:Ingress} Calculated MOS value using RTP RX statistics
39
 Telcob-MosEgress string
 @{Stat:MOS:Egress} Calculated MOS value using RTCP statistics (available only when RTCP is enable)
40
 Telcob-RemoteSipIP ipaddr
 @{RemoteSipIP} For SIP calls, IP address of the remote peer for this call leg
41
 Telcob-RemoteSipPort integer
 @{RemoteSipPort} For SIP calls, UDP port of the remote peer for this call leg
100
 Telcob-RtpRxPackets Integer
 @{Stat:Rtp:Rx:Packets} Number of packets received from the IP network (audio + comfort noise + signaling)
101
 Telcob-RtpRxVoiceBytes Integer
 @{Stat:Rtp:Rx:Packets} Number of payload bytes from voice (audio) packets received from the IP network
102
 Telcob-RtpRxVoiceDuration Integer
 @{Stat:Rtp:Rx:VoiceDuration} Duration (in seconds) of voice (audio), from IP to TDM direction
103
 Telcob-RtpRxMaxPlayoutDelay Integer
 @{Stat:Rtp:Rx:VoiceDuration} Maximum (for the whole call) IP to TDM audio delay in millisecond (adaptive jitter buffer delay)
120
 Telcob-RtpRxErrors Integer
 @{Stat:Rtp:Rx:Errors} Total of all detected errors in the 'Rx' direction
121
 Telcob-RtpRxLostPackets Integer
 @{Stat:Rtp:Rx:Error:LostPackets} Number of packets lost (never received for play-out to TDM)
130
 Telcob-RtpTxPackets Integer
 @{Stat:Rtp:Tx:Packets} Number of packets sent to the IP network (audio + comfort noise + signaling)
132
 Telcob-RtpTxVoiceDuration Integer
 @{Stat:Rtp:Tx:VoiceDuration} Duration (in seconds) of voice (audio), from TDM to IP direction
150
 Telcob-RtpTxErrors Integer
 @{Stat:Rtp:Tx:Errors} Total of all detected errors in the 'Tx' direction
151
 Telcob-RtpTxLostPackets Integer
 @{Stat:Rtp:Tx:Error:LostPackets} Number of packets considered "lost" by remote side (only available if RTCP is used)
152
 Telcob-RtpTxArpFailure Integer
 @{Stat:Rtp:Tx:Error:ArpFailure} Number of failures to ARP remote IP address to send RTP packets to (preventing sending any packets)
160
 Telcob-RtcpJitter Integer
 @{Stat:Rtcp:Jitter} Inter-packet interval jitter, in millisecond 
* = Not implemented.

The column Text CDR Variable provide the reference to the corresponding variable in the text CDRs. See the Text-based call detail records.

Radius Accounting dictionary

  • The Radius accounting dictionary is located on the TMG or SBC unit's filesystem at this location: 
 /lib/tb/toolpack/pkg/[version]/web/radius_dictionary

For example: 

 /lib/tb/toolpack/pkg/3.0.40/web/radius_dictionary

If you do not have access, please contact TelcoBridges support to get a copy.

Radius AAA sample

Retrieved from "https://docs.telcobridges.com/mediawiki/index.php?title=Toolpack:RADIUS_CDR_attributes_D&oldid=28586"
Personal tools