Toolpack v2.4:Status Menus:SS7 ISUP

From TBwiki
Jump to: navigation, search

General and detailed status information about the SS7 ISUP stack is accessible from the SS7 ISUP tab of the Global Status view.


Contents

General view

The SS7 ISUP general view, shown below, lists ISUP stacks and indicates which are active, in standby, or out of service (Oos). In addition, the SS7 ISUP general view lists ISUP interfaces and indicates which are available, congested, or unavailable. This general view provides links to detailed status views of the ISUP stacks and networks.


Web Portal v2.3 ISUP General View.png

Detailed view

The SS7 ISUP detailed view groups status information into four main screens, as follows:

  • SS7 ISUP Stack Status
  • SS7 ISUP Interfaces Listing
  • SS7 ISUP Interface Status
  • Circuit Group Status




ISUP Stack Status

The ISUP Stack status screen groups status information about the ISUP Stack under two tabs, as follows:

  • Stack Tab
  • Interfaces Tab


ISUP Stack Status: Stack tab

The Stack tab of the ISUP Stack status screen, shown in figure 15.32 on page 189, provides the name of the primary and optionally secondary Tmedia unit that hosts the ISUP stack and the status.


Web Portal v2.3 ISUP Stack Tab.png

ISUP Stack Status: Interfaces tab

The Interfaces tab of the ISUP Stack status screen, shown in figure 15.33 on page 190, lists the configured ISUP interfaces of the ISUP stack and provides the states of each network as well as their transmit and receive message counters. Selecting an ISUP Interface link displays its detailed information.


Web Portal v2.3 ISUP Interfaces Tab.png



ISUP Interface Status

The ISUP Interface status screen groups status information about the interface under two tabs, as follows:

  • Interface Tab
  • Circuit Groups Tab


ISUP Interface Status: Interface Tab

The Interface tab of the MTP3 Network status screen, shown below, provides transmit and receive message counters for a specific ISUP interface.


Web Portal v2.3 ISUP Interface Tab.png

ISUP Interface Status: Circuit Groups Tab

The Circuit Groups tab of the ISUP Stack status screen, shown below, lists the configured circuits groups for a specific ISUP interface. In addition, this screen provides status and counters for each circuit group. Selecting a circuit group link displays its detailed information.


Web Portal v2.3 ISUP CIC Tab.png



Circuit Group Status

The Circuit Group status screen, shown in figure 15.36 on page 192, displays detailed information for one circuit group, such as status counters and configured values. From this screen, the desired group state may be set to Unblocked, Blocked, or Default.

To modify the desired group state

1. Select a value

2. Click Apply States


Web Portal v2.3 ISUP CIC Status.png

Personal tools